Jump to content
SAU Community

Recommended Posts

Hi, I've been searching with no luck around the web, I'm trying to find out pinouts on the f3 plug for an engine conversion 

if anyone can have a look or trace the ecu plug to the f3 plug

just need vss speed/ revs/mil / dash temp and ignition might aswell put fuel pump for future reference for others 

just doing a engine conversion  sold the main engine loom with the engine

 

I am pretty sure yellow/green is speed and yellow/red is rpm  not sure on mil light or temp any help would be wonderful thanks

Link to comment
https://www.sau.com.au/forums/topic/474175-f3-pinouts-r33-s1-wanted/
Share on other sites

Thanks Rusty, I've already got that the mil light changes from a orange with black stripe I'm thinking it may turn into orange but that's going on S13 wiring n it could be any colour really I'll grab a test light on the weekend and post a pinout ... Also anyone know if the Speedo needs a AC wave like the S13 or if a square wave is fine 

AFAIK the output from the skyline box is an AC wave that is converted by the cluster to an output usable by both speedo and ecu. The speed signal starts out at the speed sensor as a +/-1 volt sawtooth (roughly AC) signal generated by the rotation of the sensor.  The 2 wires associated with this go to the cluster, where the speedo reads it and displays it.  The speedo head also converts the signal to a 0-5v square wave pulse that it puts onto the bus.  The ECU looks for that signal.( Thanks to GTS Boy for this info in previous post)

You got so lucky i'm removing the head off of my 25det today so here are some pics, the plug on the harness is two pin not three the additional black is in the second pic and is earthed to the igniter. The two in two pin plug are white and black20180601_105128.thumb.jpg.0929a6f553ade37f5087763e98c80241.jpg

20180601_110542.jpg

Edited by Rusty Nuts

The white is power 12v+ and goes to every centre pin on the coil plugs. The various pinks with stripes (except cyl 1 which is black with pink stripe) go to pin left of white when looking at rear of coil plug. The black goes to the right. The black and Red in your diagram is probably the timing light breakout ,check for continuity with No.1. Happy to help so ask away, I drove myself mad wiring a Neo into a Series 1. 

Edited by Rusty Nuts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...