Jump to content
SAU Community

R34 GTT Manual Coupe for sale - Sydney

Kinks
 Share

Recommended Posts

Kinks Grand Master

Kinks

Posted
Posted

Have daily driven this car for the last 4.5 years and it has always been dependable and fun.

Car has a genuine 215,000km on it (photo showing 210k was taken in April).

Suspension refreshed shortly after purchase with Bilstein shocks, Whiteline adjustable anti-roll bars, and bushes replaced as required.

Added Adaptronic ECU and dyno'd at 176rwkw in 2015. Since then added Blitz return-flow cooler and Fujitsubo straight-through cat-back exhaust which sounds great and breathes really well. AFRs were checked with wideband sensor after the last mods.

200,000km major service done on time, full timing belt service AND valve clearances adjusted (at considerable expense, but the head is very quiet). Motor has very low oil usage as well, much better even than my previous R33. These Neo motors are great units.

Body condition is good but not pristine, after all it's a 19 year old car. Bonnet has some light scratches and small crack in front bar that could be easily repaired with some fibreglassing, unfortunately my schedule doesn't leave much time for tinkering these days.

It has a genuine Nismo body-kit and rear wing supports, which I'm told is quite an expensive addon and is very tasteful and unique. Daytime running lights added which fit the aesthetics of the car perfectly.

 

Genuine enquiries only please, test drives will only be available to serious buyers with a deposit.

 

Blitz return flow intercooler

JJR stainless dump pipe

5" High flow metal cat

Fujitsubo stainless catback exhaust

Adaptronic ECU

Spitfire coil packs

Bilstein shocks

Whiteline anti-roll bars

Suspension bushes replaced

Driftworks total HICAS eliminator

Genuine Nismo body-kit

Bluetooth/DAB+ head unit

Xenon HID lights

Daytime Running Lights (DRLs)

AGM battery

 

$19,500

Also advertised elsewhere

Contact Geoff on 0435 325 647

 

IMG_8487.JPG

IMG_8489.JPG

IMG_8492.JPG

IMG_8497.JPG

IMG_8505.JPG

IMG_8507.JPG

IMG_8512.JPG

IMG_8513.JPG

IMG_8514.JPG

IMG_8515.JPG

IMG_8523.JPG

  • 1 month later...
  • 2 months later...
  • 4 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...