Jump to content
SAU Community

Recommended Posts

I posted this car before but retracted it when I thought it had a problem. It turned out to be a dud spark plug and all is well again so it's back up for sale.

Here it is again:

Factory Black 1990 GTSt Type M Rego til Dec 04

This is not a show car but a standard looking car with all the good gear on it.

THIS IS A PERSONAL IMPORT VEHICLE SO ADR COMPLIANCE WAS NOT REQUIRED AND MODS ARE LEGAL ( so long as they are deemed roadworthy which these are ).

The Go Bits. :wassup:

Engine rebuilt late last year with Arias Forgies, balanced bottom end, medium level head work including match porting heads to manifolds. Chemical Cleaning and repainting was done.

Other features are:

- High Energy 9L capacity sump with trap doors etc.

- New Oil and Water pumps, mounts and tensioners etc.

- Earls Sandwich Plate and Oil Cooler

- Power Enterprise 550cc Injectors

- Splitfire HEI Coil Packs

- Ducted Apexi Pod Filter

- HKS GT2535 Turbo ( In excellent condition ).

- Split Ceramicoated Dump Pipe into 3" Apexi S/Steel Exhaust

- GReddy V-SPL Front Mount Intercooler

- OS Giken Twin Plate Clutch

- Cusco Catch Can

- Cusco Strut Tower Brace

- Nismo Fuel Pressure Regulator

- Chipped Stock ECU

- GT-R Fuel Pump

The Drive Bits. :burnout:

- Standard G/box

- Rebuilt Tailshaft

- ATS 1.5 Way LSD

- Dummy Rear Steering Rack

- C's Short Shifter ( with heavy G/Knob )

- Custom Valved Bilstien coil-overs with height adjustable King Springs

- Custom Sway Bars

- Cusco Front Upper Ball Bearing Links

- Caster Kit ( Brand un-known )

- Rear Cradle Pineapples

- A Tech Monoforged alloys (F) 17x8" & ® 17x9" with Falken 235/45's and 255/40's

The Stop Bits. :confused:

- EBC Front Discs and Pads with Synthetic Brake Fluid

- Cusco Brake Master Cylinder Brace

- Nismo Coated Braided Brake Lines

The Other Bits. :uhh:

- Nismo 260kph Speedo

- Pivot Shift Light

- Blitz Racing Boost Gauge

- Sony Explode Head Unit

- Kenwood Amp

- Kenwood Front Splits

- Pioneer Rears

- 10" Boxed Sub

- Tinted Windows

- GT Gearlock

- Other spare bits and pieces included

The Price. :(

Now $19,900 FIRM ( Priced to sell ).

No time wasters or joy riders please.

NOTE: I don't have a digi camera but if there's genuine interest I'll try to organise

something.

Link to comment
https://www.sau.com.au/forums/topic/47445-modified-r32-gtst/
Share on other sites

Forgot to mention, I would also consider a trade and cash adjustment with either ot the following if in extremely good and stock condition.

- Manual R32 GTS 2 door with RB25DE ( NON TURBO )

or

- Manual S13 Silvia with SR20DE ( NON TURBO )

As you may gather by this, I have a small problem with my right foot and am selling my car and moving into something slower to try to keep my licence. :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/47445-modified-r32-gtst/#findComment-960276
Share on other sites

To all who have shown interest, thanks, and I now have a semi-dodgy-digi camera ( and am learning how to use "properly" ) so by Monday I should have some pics which I'll try to post here as opposed to sending them to all of you individually.

If I can't do this, I WILL send them out to each of you.

Link to comment
https://www.sau.com.au/forums/topic/47445-modified-r32-gtst/#findComment-970159
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...