Jump to content
SAU Community

Recommended Posts

No possible way known. The MR2 is a mid mounted 1.6 with its own drive lines gear box etc etc. The RB25 is a straight 6 with a North south displacement that is designed to sit down the front. You would need about 5k in just suspension mods alone to keep the car at a driveable hieght after fitting such a heavy engine. I think you would have about as much chance of doing this as taking over the world!

Link to comment
https://www.sau.com.au/forums/topic/47465-rb25det-in-mr2/#findComment-959311
Share on other sites

3SGTEUs or whatever they are called are a good engine. Apparantly if you want to build a tough example then the one sourced from a late model Celica GT4 is the way to go.

They are still going cheap, im amazed mroe ppl arent trying to bring them in under 15yr rule...perhaps there arent many good examples gettign around?!?!?!

Link to comment
https://www.sau.com.au/forums/topic/47465-rb25det-in-mr2/#findComment-959375
Share on other sites

The old 4AGZE is actually a really good motor, ports are good sized for boost induced power - the bottom end is very very strong, and the ECU and injectors are reasonable overrated for stock. Get a supercharged one, a semi decent intercooler, a turbo (EVO TD05's work real well I've heard) and an aftermarket ECU and you'd get a light car without the hassle of an engine transplant etc and over 300hp. I know plenty of people who have done it, with excellent results..

I also know a guy with an AW11 MR2 ( the early shape I assume you are talking about) with a 3SGTE from a late model 2l turbo MR2, it is happily a 12s car.

Anyway, this is a Nissan orientated forum so I should shut up now :rofl:

Link to comment
https://www.sau.com.au/forums/topic/47465-rb25det-in-mr2/#findComment-959525
Share on other sites

the 3sgte motor can handle allot we have a 700bhp example and it runs 10s all day they are good motors for the money

K

Funny i have heard quite the opposite, about how they chuck there toys at around 400BHP>? Quite a few caldinas GTT's etc putting rods out the side of the block all on a relatively stock 3SGTE- And after looking around abit its actually really common.

Link to comment
https://www.sau.com.au/forums/topic/47465-rb25det-in-mr2/#findComment-960310
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...