Jump to content
SAU Community

Recommended Posts

Perhaps look at a GTS25 (RB25DE) with a 2.5L NA engine? They are 140-something Kw (@ flywheel) stock and since a R32 weighs between 1260kg to 1320kg, it should pretty alright.

Dunno how much of a difference full-comp will cost you for a turbo R32 vs. a NA R32 (I don't think it's like night and day), it maybe better goin the turbo route.

IMO I don't think it's worth paying $2000-odd dollars on full comp insurance on a car that's some 12 - 15 years old. You'll pay half the value of the car just in insurance in 3 to 4 years.

only problem with R32 GTS25s is that most of em are auto models.

mines an N/A 1993 V Selection 2. The mods i have are... stainless steel fujitsubo extractors, HKS Airbox and full 2.5" exhaust with a rather high flowing cat :rofl:

it made 87rwkw with no tuning on 98RON fuel and only an ECU reset. Haven't properly dyno'd it since i'm droppin an RB25DET and TD06-25G into it :(

I am just look at a r32 gts-t non turbo 1989, but other than changing th ewhole engine itself what else can be done to improve the performance without spending a great deal of money?, because this is my first car by the way. I also want to ask how much insurance would i be paying if i went in teh 3rd party direction for this particular car non-turbo?

well my mate bought a R32 GTE (with an RB20E engine, which is even slower than a normal non turbo) for $1.50 and cost him $4500 something to bring into the country, plus 2k in compliance and rego and for $6500 he's got a 4 door R32 whicha buggered engine. So he's gonna kill the engine (quite litereally tharsh the **** out of it) then replace it with an RB25DET or something.

You'd be looking for a 1989 R32 GTS, which shouldn't be too expensive since everyone's looking for something tricked out. Since there's not really a demand for it, finding a relatively highly modified R32 GTS will be easy. I'm thinking something with 6 throttle bodies and the works. There's a few in Japan (not 89 models though) that run that setup and keep up with stock R33 GTSt's.

If you're in glenny send me an email sometime, I'll give you a ride in my clapped out GTS. And if you like it I can organise one from japan that's uber cheap.

I am some what confused about what a skyline gts-t and a gts are, what are the differences between the 2?, because i have never had a proper answer to that question.

By the way how cheap could u get the skylines any way the GTS or gts-t?

GTE = R32 poverty pack skyline with 2L N/A SOHC Engine (liek the one in the R31's in australia, but instead of 3L its 2L)

GTS = Regular R32 N/A with RB20DE engine

GTS25 = late model (think post 1992 or something) car with 2.5L N/A engine and mostly in auto (manual GTS25 is hard to find)

GTSt = GTS with a turbo engine called the RB20DET

GTS Type S = GTS Coupe with Full Sports Options as standard

GTSt Type M = GTSt Coupe with Full Sports Options as standard

GTS4 = GTS or GTSt with 4WD instead of RWD

confused enough?? :rofl:

the 89 GTSt i've brought down so far have cost maybe about 9k landed for an average one, and around 11k for a good one. Haven't brought down an N/A yet, coz I usually skip em.

The rules are about to change in August to either

a) any cars made after 1988 have to go through regular RAWS compliance instead of being eligible for 15 year exception

or

B) any cars brought in under the 15 year rule must have no accident history and be factory standard

or

c) 15yr rule change to 25 year rule.

This is thru some guys I know who work with DOTARs so brace yourself for changes to be made in August (and no they don't need to pass it thru parliament and give 18 months notice for an amendment).

yeah.. was meant to be july though :rofl: then the minister apparently got shuffled around to another post.

but if you've heard august its probably august..

They better make it if you've purchased the car you can still bring it in (like last time), or i'm up the shitter.. should be right..

yeah, by law they have to apply the rules that applied at the time of purchase, so everyone who buys now should be ok. Even if you bring it in after the law change, compliance etc is done under the laws that applied at the time of purchase. Its a pain in the arse with the extra paperwork and ringing DOTARS required, but yeah in the end it should be ok.

the price of insurance for a non turbo r32 vs turbo r32 wont be that much difference

get some quotes. the main cost of insurance is cos its an imported car, adding a turbocharger will add around an extra $200 per year or a tiny bit more

I didnt see this thread until now.

I posted this in your other thread.

With the money you would spend on making the gts faster you could have bought a gtst.

I have thought about getting rid of the rb30e and dropping an rb25de into an r31 but it really isnt worth it. I think the most it would it making at the wheels with some mods would be 110rwkw. I doubt it would have the same torque output even with the same mods.

The rb20de would be even worse, torque is going to be pretty sad. When you have an N/A engine displacement makes quite a difference and is an advantage.

The rb30 with the same mods would have a similar output (90 - 100rwkw) but it would have more torque.

Quote:

Originally Posted by Skylinerz

How can it because i want to get a r32 without a turbo because of the insurance and all, but what mods can i get to improve the horsepower, acceleration ect without a turbo.

Its been posted up on the forums a few times that the difference between N/A and turbo skylines isnt that much.

Quote:

Originally Posted by Skylinerz

what mods can i get to improve the horsepower, acceleration ect without a turbo.

If you are serious about modding the rb20de go with what blitz said. Its simply not worth going any further apart from turbo charging it.

I think you'd get from 0-100km/h in around 8.2 - 9.0 secs.

I say, save you money up for a gtst. You will be thankful you did and the turbo makes a world of difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...