Jump to content
SAU Community

Recommended Posts

Perhaps look at a GTS25 (RB25DE) with a 2.5L NA engine? They are 140-something Kw (@ flywheel) stock and since a R32 weighs between 1260kg to 1320kg, it should pretty alright.

Dunno how much of a difference full-comp will cost you for a turbo R32 vs. a NA R32 (I don't think it's like night and day), it maybe better goin the turbo route.

IMO I don't think it's worth paying $2000-odd dollars on full comp insurance on a car that's some 12 - 15 years old. You'll pay half the value of the car just in insurance in 3 to 4 years.

only problem with R32 GTS25s is that most of em are auto models.

mines an N/A 1993 V Selection 2. The mods i have are... stainless steel fujitsubo extractors, HKS Airbox and full 2.5" exhaust with a rather high flowing cat :rofl:

it made 87rwkw with no tuning on 98RON fuel and only an ECU reset. Haven't properly dyno'd it since i'm droppin an RB25DET and TD06-25G into it :(

I am just look at a r32 gts-t non turbo 1989, but other than changing th ewhole engine itself what else can be done to improve the performance without spending a great deal of money?, because this is my first car by the way. I also want to ask how much insurance would i be paying if i went in teh 3rd party direction for this particular car non-turbo?

well my mate bought a R32 GTE (with an RB20E engine, which is even slower than a normal non turbo) for $1.50 and cost him $4500 something to bring into the country, plus 2k in compliance and rego and for $6500 he's got a 4 door R32 whicha buggered engine. So he's gonna kill the engine (quite litereally tharsh the **** out of it) then replace it with an RB25DET or something.

You'd be looking for a 1989 R32 GTS, which shouldn't be too expensive since everyone's looking for something tricked out. Since there's not really a demand for it, finding a relatively highly modified R32 GTS will be easy. I'm thinking something with 6 throttle bodies and the works. There's a few in Japan (not 89 models though) that run that setup and keep up with stock R33 GTSt's.

If you're in glenny send me an email sometime, I'll give you a ride in my clapped out GTS. And if you like it I can organise one from japan that's uber cheap.

I am some what confused about what a skyline gts-t and a gts are, what are the differences between the 2?, because i have never had a proper answer to that question.

By the way how cheap could u get the skylines any way the GTS or gts-t?

GTE = R32 poverty pack skyline with 2L N/A SOHC Engine (liek the one in the R31's in australia, but instead of 3L its 2L)

GTS = Regular R32 N/A with RB20DE engine

GTS25 = late model (think post 1992 or something) car with 2.5L N/A engine and mostly in auto (manual GTS25 is hard to find)

GTSt = GTS with a turbo engine called the RB20DET

GTS Type S = GTS Coupe with Full Sports Options as standard

GTSt Type M = GTSt Coupe with Full Sports Options as standard

GTS4 = GTS or GTSt with 4WD instead of RWD

confused enough?? :rofl:

the 89 GTSt i've brought down so far have cost maybe about 9k landed for an average one, and around 11k for a good one. Haven't brought down an N/A yet, coz I usually skip em.

The rules are about to change in August to either

a) any cars made after 1988 have to go through regular RAWS compliance instead of being eligible for 15 year exception

or

B) any cars brought in under the 15 year rule must have no accident history and be factory standard

or

c) 15yr rule change to 25 year rule.

This is thru some guys I know who work with DOTARs so brace yourself for changes to be made in August (and no they don't need to pass it thru parliament and give 18 months notice for an amendment).

yeah.. was meant to be july though :rofl: then the minister apparently got shuffled around to another post.

but if you've heard august its probably august..

They better make it if you've purchased the car you can still bring it in (like last time), or i'm up the shitter.. should be right..

yeah, by law they have to apply the rules that applied at the time of purchase, so everyone who buys now should be ok. Even if you bring it in after the law change, compliance etc is done under the laws that applied at the time of purchase. Its a pain in the arse with the extra paperwork and ringing DOTARS required, but yeah in the end it should be ok.

the price of insurance for a non turbo r32 vs turbo r32 wont be that much difference

get some quotes. the main cost of insurance is cos its an imported car, adding a turbocharger will add around an extra $200 per year or a tiny bit more

I didnt see this thread until now.

I posted this in your other thread.

With the money you would spend on making the gts faster you could have bought a gtst.

I have thought about getting rid of the rb30e and dropping an rb25de into an r31 but it really isnt worth it. I think the most it would it making at the wheels with some mods would be 110rwkw. I doubt it would have the same torque output even with the same mods.

The rb20de would be even worse, torque is going to be pretty sad. When you have an N/A engine displacement makes quite a difference and is an advantage.

The rb30 with the same mods would have a similar output (90 - 100rwkw) but it would have more torque.

Quote:

Originally Posted by Skylinerz

How can it because i want to get a r32 without a turbo because of the insurance and all, but what mods can i get to improve the horsepower, acceleration ect without a turbo.

Its been posted up on the forums a few times that the difference between N/A and turbo skylines isnt that much.

Quote:

Originally Posted by Skylinerz

what mods can i get to improve the horsepower, acceleration ect without a turbo.

If you are serious about modding the rb20de go with what blitz said. Its simply not worth going any further apart from turbo charging it.

I think you'd get from 0-100km/h in around 8.2 - 9.0 secs.

I say, save you money up for a gtst. You will be thankful you did and the turbo makes a world of difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And if you want more power, more reliably, and cheaper, go get the Aussie RB... The 4L Barra and put that in instead.
    • No cats will keep discolouring the rear bar. Sends white paint a weird yellow stain. Cut and polish normally gets it out, but you'll be doing that every fortnight I found.
    • Both heads will be equally reliable or unreliable depending on what you do to them.  Stock the RB26 head will flow more. You have access to the stock intake ITB manifold on the RB26 cheaply which flows really well(1000hp+).   Arguably more aftermarket support for RB26, though in Aus we love our RB30 SOHC heads too.    The only downsides to the RB26 head is if you have a VL commodore and want to keep the SOHC look.  Where you may have an issue is drilling out the rb30 block for the bigger head studs but if you are building a big power motor you'd probably put bigger studs on the SOHC head too.  This is just about finding a good machine shop, sometimes easier said than done.  RB30 head worked can make big power just like a Rb26 head, so really it actually more comes down to what your preference is for your car.  People now even making billet versions of both.
    • 2630s work perfectly well. There is something to be said for just using the 30 head, as it saves all the pain of the conversion, still makes tons of power, still sounds cool, etc etc. 2630 will obviously make more power again, but the differences are not stupidly big. It really depends on whether you're racing for sheep stations or not. If it's dead serious, then it's a 26 head. If it's just for fun, it could go either way. But the 26 head and the effort to get it set up, etc etc, is part of the fun.
    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
×
×
  • Create New...