Jump to content
SAU Community

Recommended Posts

have trawled through endless pages of forum posts and am not seeing a part number listing for front steering rack ends and tie rod ends, or what they are compatible with IE: R33 or R34 skyline, maxima, hell even Navara or Pootrol.

I am starting to get a little bit of movement in one of the rack ends and local parts outlets and workshops are useless when it comes to finding listings of parts or compatibility, and to make it even worse the mouth breathing  nufty's that occupy space behind the local nissan parts counter are also less than helpful, they have had their access to FAST removed by Nissan australia apparently.

if someone is able to give me a compatibility part number/model of car from  locally available stuff would be awesome, car is Series 2 RS4 AWD auto.

thanks in advance, and whomever has access to said part number would they be able to get them added into the stagea parts list sticky perhaps?

 

 

Cheers for that, my local parts stores are populated by deadshits that aren't willing to attempt to cross reference anything for you, they see it as our job to do that, and they just blindly order it

2 hours ago, oxford1327 said:

Cheers for that, my local parts stores are populated by deadshits that aren't willing to attempt to cross reference anything for you, they see it as our job to do that, and they just blindly order it

http://www.kudosmotorsports.com/catalog/outer-front-suit-nissan-skyline-stagea-wgnc34-260rs-25tx-four-four-four-p-1090.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...