Jump to content
SAU Community

Recommended Posts

Having another parts clear out. Have a few bits and pieces lying around, all in excellent or new condition. Want it all gone so make a reasonable offer if you want something - 

-    Advan RS 19*10 + 20, excellent condition, minimal use and in storage for years, no rash or buckles - $2600

-    V spec II Xenon headlights (both in very good condition, all tabs still attached, does NOT include xenon ballasts or globes) - $750

-    V spec II centre interior trim (brand new still in box, plastic that fits behind and around sides of head unit trim, lighter grey to suit earlier model R34s) - $380

-    V spec II turbos, no shaft play - $500 for both

-    V spec II AFMs - $175 for both

-    V spec II camshafts, no kinks - $100

-    Nismo Weldina exhaust, used but in excellent condition - $900 (the OG 80mm system with oval shaped tip. Over 2k USD new)

Have attached a few pics, can take more if needed. Also attached is shot of an R34 with exact same Advan RS for reference, and the Nismo Weldina exhaust (not my actual one though mine is the same. Currently it's boxed up at the back of my garage.)

I think the prices listed are fair but as stated I would like to clean out my garage, so if you want something shoot me an offer and if it's reasonable the parts are yours.

20181113_121632.jpg

20181113_121818.jpg

20181114_134622.jpg

example GTR.png

post-87642-0-05929100-1430706391.png

post-87642-0-37869400-1430706380.png

DSC_2437.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/475395-r34-gtr-parts-clear-out/
Share on other sites

  • 2 weeks later...

Please no inboxes offering half of asking price - that's not what most people would consider a reasonable offer, especially when the prices are what they are.

Here are couple pics of the exhaust. Just took it out of box. Mint condition just needs a clean.

Also to clarify, interior trim is for V Spec I not V spec II as I erroneously typed. Part no is 68104 AA001.

1371716516_20181123_2357081.jpg.65078b10ee9575e1360dca660194867a.jpg

1412471881_20181123_2357501.jpg.f5b70f15c73db0b8053a5eb33c8819bd.jpg

  • 4 weeks later...

Have another set of Vspec II xenon headlights for sale in better condition. Was asking $1200 but happy to let them go and post aus-wide for $1000. No low-balls please

Both headlight sets sold.

Price drop on Advan rims now $2400

Nismo exhaust still available

V Spec II turbos still available

V Spec interior console trim still available

 

 

  • 2 months later...

Few pieces still lying around. Will also have factory R34 GTR V-Spec II intercooler (excellent condition, no leaks), and radiator for sale soon. Open to all reasonable offers on everything

  • 3 weeks later...

MASSIVE price drop -

Advan RS now $2000 - Will not find cheaper anywhere in the world - ever 

Nismo Weldina Exhaust now $600 - also will not find cheaper anywhere and also discontinued

Centre Trim SOLD

Headlights SOLD

R34 GTR V-spec II turbos $500 for both 

R34 GTR V-spec II radiator $300

R34 GTR V-spec II intercooler immac condition $500

 

 

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...