Jump to content
SAU Community

Recommended Posts

1991 R32 GTR. 145000kms on chassis. 32000kms on motor.
 
Engine built by ERD in QLD. NSW rego till April 2019. Still has QLD mod plates
 
60k ono - 0406217874
 
Engine
- R34 Nur Head
- Nismo N1 Block
- Race port & polish
- Tomei Oversized Valves
- Tomei Springs
- Tomei Retainers
- Tomei Valve Guides
- Tomei Bery Rings
- Tomei Lifters
- Tomei 272 camshafts
- Tomei Cam Gears
- Tomei Head Gasket
- ARP Head Studs
- Blueprinted
- R34 Nur Crank (collared & grub screwed)
- R34 Nur Girdle
- Tomei Pistons
- Tomei Oil Restrictors
- Tomei Rings
- Tomei Rods
- Tomei Pins
- ARP Rod Bolts
- ACL Bearings
- Tomei Oil Pump
- Trust Extended Sump & Pickup
- Ross Balancer
- Standard Water Pump
- Koyorad Radiator
- Samco Rad & heater hoses
- Garage Defend carbon cooling panel
- Trust oil filter relocation & PWR cooler
- All new standard sensors
- Custom catch can with braided line
 
Intake & Exhaust:
- Standard Plenum repainted
- ARC Drag Intercooler
- HKS Hard Intake Pipe Kit
- HKS MAF Delete Pipes
- Trust TypeR BOV
- Standard Manifolds Port Matched
- Garrett GT2860-5
- Midori Dump Pipes
- Midori Front Pipe
- Decat
- HKS Silent HiPower exhaust
 
Suspension & Drive Line:
- HICAS completely removed, nismo bushes put in place of ball joints
- All bushes in car replaced with Nismo bushes
- Nismo engine, gearbox, steering rack & diff mounts
- All wheel bearings, ball joints, tie rods, rack ends & kingpin bearings replaced with genuine Nissan parts
- Tein HA Super Street coil overs (rears rebuilt 2 years ago)
- GKTech Front roll center correction spacers
- GKTech V3 Front Castor Arms
- GKTech Prototype front camber arms
- GKTech V3 rear camber arms
- GKTech V3 rear traction arms
- GKTech V3 rear toe arms on brackets to subframe
- R34 GT-R Vspec brembo conversion (PMU pads & DBA rotors)
- HEL brake lines
- BM55
- HEL clutch line
- New master cylinder
- Nismo slave cylinder
- NPC Billet twin plate solid center
- Standard gearbox
- 4.375 diff gears from GTS4
- Standard diff centers
- Kansai strut braces front and rear
 
Electronics:
- Haltech Platinum Pro
- Haltech Racepak
- Haltech 4Bar Map Sensor
- Haltech boost control solenoid
- Haltech Fuel Pressure Sensor
- Haltech Oil Pressure Sensor
- Alpine CDA137EBT Head unit
- Alpine Type R 6" Speakers ×4
- Alpine 5ch Amplifier
- Pioneer 12" Sub in box
- Viper 855XV alarm with central locking
- Battery relocation to boot
 
Fuel System:
- HKS Fuel Rail
- Bosch 950cc Injectors
- Ballast delete
- Turbosmart FPR1200
- Reused HICAS lines as fuel lines
- Peterson inline filter
- FPG intank system with twin walbro 460
- Speedflow Teflon line and 200 fittings throughout
 
Exterior:
- Nismo front bumper
- Abflug Carbon front lip
- Nismo bonnet lip
- Nismo 3 piece side skirts
- Nismo rear pods
- Nismo boot lip
- Fujimura rocket dancer lip carbon
- Top secret canards carbon
- Work Meister sp1 3p 18x10+18 wrapped in hankook RS4 semi slicks
 
Interior:
- Nismo Seat Covers
- Nismo Floor Mats
- Nismo carbon mirror cover
- Nismo shift knob
- Nismo shifter boot
- Nismo handbrake boot
- Nismo 320kph dash (when fitted cluster was adjusted to read the same as the original odometer)
- Nardi deep corn 350mm perforated leather
- GKTech billet handbrake lever
- Eyebolts installed ready for harnesses
- FPG custom boot floor
 
Made 330awkw @23psi on e85. 390awkw @28psi injectors maxed. Turned down to 330awkw e85. Tuned by Benny at Benchmark solutionsIMG_3344.thumb.jpg.c98ad5bfcb853f4ff58fd752d7994f14.jpgIMG_3516.thumb.jpg.cb6a070d895bb46f46dd31d653a68cad.jpgIMG_3279.thumb.jpg.79f1849b1ce55048c8dcfc8233bf5b28.jpgIMG_3203.thumb.jpg.a763d644a0ad48e2439041471c545230.jpgIMG_3207.thumb.jpg.b0ad030a3e04fbfdaecf35e0fe34ed7a.jpgIMG_3518.thumb.jpg.9c6187bdf472fd78b9ab3a31b37f4d28.jpgIMG_3522.thumb.jpg.bd1728baebd46018591a9f8021630be7.jpgIMG_3517.thumb.jpg.d35fc8c8ff0f04688a08a11174869006.jpgIMG_3237.thumb.jpg.9aabfb3255988045f0f43ae706d49d5f.jpgIMG_3236.thumb.jpg.d52ff77ca1c0c25376f8b7e723b25b0b.jpgIMG_3235.thumb.jpg.87897dc1e92174bdece7b1d8cd00a0ce.jpgIMG_3234.thumb.jpg.390cd63295e1229672fecd1f7ddc245d.jpgIMG_3233.thumb.jpg.20466caee6a7db9cc7110821380e9bd9.jpgIMG_3232.thumb.jpg.316d9e2e42d17f585a0e371d141c0f53.jpgIMG_3206.thumb.jpg.4568e3cc1f30a7faf2313bb45c6cad18.jpgIMG_3098.thumb.jpg.470eebfe0381f842a6a9213900d773a3.jpg

IMG_3344.jpg

IMG_3516.jpg

IMG_3279.jpg

IMG_3203.jpg

IMG_3207.jpg

IMG_3518.jpg

IMG_3522.jpg

IMG_3522.jpg

IMG_3517.jpg

IMG_3237.jpg

IMG_3236.jpg

IMG_3235.jpg

IMG_3234.jpg

IMG_3233.jpg

IMG_3232.jpg

IMG_3206.jpg

IMG_3098.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/475978-1991-built-r32-gt-r/
Share on other sites

There is a phone number listed in the ad that could answer all your questions instantly. 

As a general rule, I wouldn't negotiate with somebody who hasn't taken the time to inspect or have the car inspected, or even bothered to call. They tend to be time wasters. 

  • Like 7
  • Haha 1
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...