Jump to content
SAU Community

Recommended Posts

Hello, 

I have changed lately brake booster (second hand ) and install new braking pump. Bleed the system 5 times. My ABS is disconnected

Every time i press the brake pedal i hear one hiss sound, is that nornal or not? ( its not like a constant air leaking, just one short hiss when press )

When i press the pedal and start the engine i can feel the brake pedal is falling a little bit down. This is the only test i have done so far.

The braking system is not working too well lately, i need to use a lot of force to stop the front wheels at higher speeds around 100km/h.

I heard the braking system is not too good in this cars. What do you recommend to upgrade to improve the braking system? My leg is hurting sometimes from hard braking and i want to track day this car sometimes.

 

 

 

 

11 hours ago, GTSBoy said:

Not true. They're pretty good.

I would suggest that your 2nd hand booster is no good. Get it rebuilt.

I have comparision how the braking works in different cars, I daily drive M5 E60 and Peugeot 407 and i am not using force on the pedal almost at all for hard and quick stopping from low speeds. After going back to my Skyline r33 when i use the same amount of force nothing happens.  I need to push pedal really hard to get the same results.  This is why i say the stock brakes are pretty bad in Skylines, or brake booster is too small and not doing the job.

Edited by Tomak

Problem is that i dont know if the brake booster works efficiently. What can i expect from the second hand 20 year old booster?

I did a test yesterday and disconnected brake booster and try to drive my car and the car had no braking power at all. I mean you could berely brake without booster it was so dangerous to drive, the handbrake was much  better without the booster. I guess the booster is working pretty good because the difference is huge.  Question is it working efficiently.

I wish i could purchase the new brake booster. Do you know if this part is available somewhere in Australia, Japan or maybe USA?

The part number i need is 23U11. Its the brake booster from GTS R33 since i have this one after the conversion swap RHD to LHD

It can be also refabricated if you know the source where i can get one.

 

 

Edited by Tomak

I have never driven a Nissan where you could not engage the ABS without excessive force on the pedal. When people say brakes are not good enough they usually mean that with many rapid applications they lose stopping power. If you have to stand on the brakes to pull the car up normally then there is a fault. Sounds like you were just unlucky with your replacement booster.

Has this problem existed ever since you disabled ABS? Sure all the brake lines are connected properly?

BTW almost any booster should do.

e.g. https://www.trademe.co.nz/motors/car-parts-accessories/nissan/brakes/listing-2262431068.htm?rsqid=84e0244abd7f4ea2aea053cf26cb1d59-001

 

12 hours ago, Tomak said:

It can be also refabricated if you know the source where i can get one.

Take it** to a brake workshop. Give it to them with a small handful of money (like, <$200 worth) and wait a couple of days. Presto, rebuildo.

** The booster.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...