Jump to content
SAU Community

Recommended Posts

Plus T’d my 20de to see how it’d go until my 20det is ready, I’ve basically just bolted on the turbo, intercooler and 20det red injectors, has an adjustable fpr at 40psi and walbro 255 and stock 20de ecu. 

Engine was pretty healthy prior to being turbo’d but now it smokes like f*ck and the smoke just stinks of fuel vapour. It’s insanely rich and I’m just wondering if anyone else has come across this issue? Are the injectors really pumping in that much fuel that it smokes out the garage with in 20 seconds? Or should I keep stock injectors in with boost at 7psi. Worried about leaning out. 

Link to comment
https://www.sau.com.au/forums/topic/478755-20det-rich-smoke/
Share on other sites

You can't just slap on bigger injectors on. At least run a RB20DET ECU so the fueling it somewhat in the correct ballpark.

You're commanding the same pulsewidth on bigger injectors, what do you think is going to happen?

Imagine a garden hose you open and close for 2 seconds.

Now go use a fire hydrant and open and close it for 2 seconds.

Is the flow the same? No.

8 hours ago, daninchainz said:

Yeah thought this would be the case. 20det ecu has different timing so that won’t work. I’ve put DE injectors back in for now, runs fine with those. It’s just gonna be a hack till other motors ready. 

Actually a RB20DET would run better as it has less timing in it.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...