Jump to content
SAU Community

Recommended Posts

Hello gents!

 

 

@ThePurpR34 here, so I purchased this R34 GTT earlier this year. I have essentially been tackling the things the previous owner did/did not do to better fit the car to my standards.

 

According to him it is a front gtr z-tune bumper and z-tune hood YET clearly the fitment is not proper. As you can tell from the picture, the grille part of the bumper seems to be a straight line whereas the hood curves up for the grille area creating the gap.

 

What kind of hood will fix this fitment issue? From looking it looks as though an oem gtr hood would fix?

 

Never really introduced myself on these forums, lots in the future for this car so I'll most likely create a thread once it's re-wrapped. Thank you guys for the advice and phenomenal amount of knowledge around these forums!

 

received_2708017852564604.jpeg

received_756984104745244.jpg

Edited by Thepurpr34
Link to comment
https://www.sau.com.au/forums/topic/478868-hood-bumper-fitment-gap/
Share on other sites

1 hour ago, Thepurpr34 said:

Anyone have any ideas?

Depends.....

If the bumper is made to fit GTT (and therefore not explicitly GTR) and is perhaps intended to be used with the GTT bonnet, and the GTT bonnet has a different shape (lower, flatter) to the GTR bonnet, then that would explain it.

However, seeing as it is probably all one kit to make a GTT look like Z-tune GTR, that might be poor logic. Otherwise, I have no ideas.

Looks like you have a Z tune style bumper for R34 GTT. The bonnet is for a GTR conversion. So you need either to change your bumper to a Z tune GTR type bumper or you could get a GTT bonnet like this one:

https://www.trademe.co.nz/motors/car-parts-accessories/performance/body-kits-mouldings/listing-2344168142.htm?rsqid=73bf4b8f6e2542f4a8ed34684579f0b6-003

Same problem here, I bought the bumper, bonnet and fenders from Luxury sports in NZ and they were a terrible fitment, badly moulded.      I had to do a lot of alterations to the kit. I installed the gtr front reo bar and all the brackets which did help to pick the nose up but it's still not perfect.

IMG_0015_LI.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...