Jump to content
SAU Community

Recommended Posts

so have finally finished putting the box back together, but now it's all assembled and housings are back on, I have an issue where it's locked in 4th gear constantly and will only turn by hand in 4th or neutral, but the whole shaft turns in neutral, not just one end. It selects all gears fine but won't turn in any other gear. Before I put the housings back on I confirmed all gears select and shift as they should and all turn accordingly with the gear selected, but once the front housing is back on, it locks up. I stripped it back down to make sure hadn't made any error in reassembly and the syncros bearings etc all sitting as they should, and everything was fine but as soon as the front housing went back on, it locks up again. I haven't filled it with any fluid yet so I'm thinking maybe is there too much friction on the 4th syncro when it's dry? (although I did put a little grease on it on it when reassembling for the 2nd time, hasn't made any difference). 

This box was a 2nd-hander off gumtree so I never actually used it myself to know of any issue with it prior. At a standstill with it now so, ideas are welcome.

Definitely sounds like 4th synchro is not letting go. Usually some oil squirted there fixes it and sounds like you're onto it being a dry problem. Have seen that happen on our boxes, and have had calls about boxes doing that with new sychros we have supplied.

Thank you once again for your help. I was going to give it a part-fill before putting it back in the car and give it a thorough turning over to get oil over everything; hopefull does the trick.

Hey mate on a more serious note, please tell me you used Threebond 1207C sealant on the bottom three front cover bolts and NOT threadlocker (or even worse nothing) ? Had to pull my dog box out of my 32 on the weekend, after the one box we didn't do ourselves and outsourced pissed oil out of the front cover. Noticed a slight drip under bellhousing and though fcuk, they didn't did they ? Found this as expected...

IMG_1947.jpg

WP_20191012_15_50_48_Pro.jpg

WP_20191012_15_49_22_Pro.jpg

WP_20191012_15_49_12_Pro.jpg

WP_20191012_16_58_53_Pro.jpg

WP_20191012_17_16_51_Pro.jpgPretty annoying to pull a box out to reseal 3 bolts, but said transmission specialist was very apologetic after I showed him the stuff up. We didn't check front cover before install, but why would we ? It was done by a very experienced transmission specialist that knows what they're doing, so it can and does happen to anyone. It is in the Nissan manual after all so no excuse....

Check, check, check

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...