Jump to content
SAU Community

Recommended Posts

Howdy all. Used to be a member long time ago. Looking at buying a mid 80s skyline.

does anyone recommend a mobile inspector in Adelaide who knows their old skylines assuming I won’t be able to take the car to a shop. Or an experienced known member willing to, happy to pay. The garage where the car is in has a hoist. 
 

ive never bought a car from interstate and sort of nervous as car is unreg and been in storage but done the ppsr vin engine no etc etc all checks out even the export cert. any help would be greatly appreciated. 
 

 

Link to comment
https://www.sau.com.au/forums/topic/479533-inspecting-a-skyline-interstate-sa/
Share on other sites

Depending on the model, you would want it to go to a Skyline specialist shop (within reason).

I have had bought both my cars from interstate. Both cars were inspected by reputable workshops (Galvsport & CRD). 

If you're at the other end of the spectrum (clapped out R31 for $500), you could probably just go for a normal NRMA/RAC test. 

I'm sorry i don't have any specific workshops for you, but you can try these threads, 

https://www.sau.com.au/forums/topic/54061-best-adelaide-skyline-workshops/

https://www.sau.com.au/forums/topic/431425-reputable-workshop-in-adelaide/

Alternately here is the search.

https://www.sau.com.au/forums/search/?q=Adelaide Workshop&fromCSE=1

Most of these are probably pretty old, so make sure you check google and facebook reviews of places. Good luck.

1 hour ago, NCRAW said:

Thanks Steve much appreciated. Where u there when you bought interstate or left it to the shop and organised transport? 

No problemos. 
I live in Melbourne and bought a car from Perth (Galvsport) and from Sydney (CRD). 

To be super clear, I did an insane amount of homework on both cars (in terms of modifications for the LM and the history of the Silver GTR), to the point where i knew the background of both better or as well as the sellers. 

Once I was happy with the cars inspections, I was planning to go and see them both and buy in person. Unfortunately, my life dictated otherwise. For the LM, I flew to a mine-site for 4 weeks straight and for the KR4 GTR, I purchased it around xmas, so my availability and that of the seller was not compatible. 

For the LM, I made the purchase, once the car was stored at Glavsport. That way, I owned the car, and it was in a workshop I trusted until it was shipped over by Galvsport. 
For the KR4, I did it differently, I put down a deposit, then arranged my own transport (Allens Car Carriers I think, i can dig it out if you need it), once I had it all booked in ready to go. I paid the day before at 4pm in full. Car carrier showed up and took the car at 10am the next day. They were great and the driver inspected the car before he took it. I had provided him with the CRD inspection report, so he knew it should be in perfect condition. 

For the KR4 I was a little worried, i'd have to call in all my favours from my Sydney friends or fly up at short notice if things went south, but nothing did and it's all history now. 

My advice would be if you can't be there, ensure you get a reputable inspection and go for the workshop storage option, the stress of buying a car privately unseen for big money was excruciating and could easily have seen me get ripped off.

  • Thanks 1
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, it went to Unigroup for a run in and tune on Friday, everything went (generally) well. In terms of fixes, the engine was good and there were no leaks. It needed plugs (I hadn't checked them because the coil pack cover was on a new engine and I couldn't imagine they weren't new.....but turns out the temporary plugs to just keep it sealed up were in there.....new plugs gapped to 0.8 and it was fine from there. Also, there was a little preload on the clutch slave which caused some slip. I haven't had the box off so I don't know what the clutch looks like; my guess it is brand new and the pedal had not been adjusted....backed that off a bit and it held fine. Last thing will have Dose crying....the idle especially when cold is a bit difficult between the cams, forward plenum, atmo blow off valve and an 80s air management system. It is fine when hot but a little uneven when cold, will see if I can sort or at least improve that one cold morning. Other than that, tuning went fine. It made 245 but was pulled back to 227 which 2 opportunities to improve in future. 1. The factory CAS is not great and was jumping around at high RPM, so Mark took 2 degrees out up top (that is why it stops making power and lost 20kw). Very safe this way and the extra power is available but will require a more modern ECU and better cam (or even better crank) sensor 2. The 2871 in factory housings is very big for a low mount, and the internal wastegate is too small, so it was creeping from mid range all the way to redline....the duty cycle on the boost controller is turned down a little for safety. That is much harder to fix, it would need a large external gate and that would require a whole bunch of other changes, so it will go as it is for now. It feels nice and healthy and safe, so should be good for about a billion laps like this.
    • what sort of caliper are they? If they are a slider and you gave everything a good clean, you might need to regrease the pins. My guess though is they will come good after some abuse as suggested above
    • I don't know what you should expect with an LS, but the oil pressure sounds terrible, sorry. As for the brakes, you can get fade from the pads not just the fluid, although generally that feels like a wooden block not doing anything while fluid feels like an oh shit there is no pedal so you can generally tell. What pads are you running front and rear?
    • Went over my datalogs on a whim and noticed a worrying combination of events. High RPM High Temperature Low Oil Pressure Knock Retard I bought some 10w-60 because I actually think this will be better going forward given track temp is 125C and 10-40 will actually be thinner in those environments. I know I had a leak but it's not entirely sure how much pressure loss can be attributed to that. The knock retard does correlate with all of the above. When it's not present oil pressure is higher. And by 'low' I mean at 6800 RPM the oil pressure was recorded as low as ~35psi pretty constantly. Which is obviously very not good. I'm hoping that thicker oil that ISNT LEAKING will result in a bit more pressure when I need it. Also in the last session I got a very spongy break pedal. I bled the lines as the car is on jack stand right now with the wheels off and I noticed... no air in the lines? Maybe the tiniest bit of tiny frothy bubbles for the first 0.1 seconds of bleeding the whole car? The breaks did come back to me after I backed off (and felt fine driving normally). Doesn't appear to be any leaks anywhere that I can see. Any thoughts on that?
    • Solution, run shitter tyres. Let wheel spin be your weak link 😛
×
×
  • Create New...