Jump to content
SAU Community

Recommended Posts

Guest GR33DyMANGO

ive installed a few subs. just make sure u put a fuse between the amp and battery. when u turn it on for the first time...

MAKE SURE THE FUSE IS OUT AND DECK TURNED OFF DURING THE WHOLE INSTALLATION!

as a final step put the fuse in and turn the deck on..

ive had a bad experience connecting the whole thing with the fuse in... good bye amp :D

oh yer and make sure u use thick cable if you have a powerful amp otherwise the wire can melt which is really dangerous.

hope that can help:D

  • 2 weeks later...

just a another tip as well...when you are grounding your amp, make sure the line between the amp and ground is as short as possible. also, the power line which goes to your amp should have a fuse within 30cm from the battery....just some things i have picked up from hanging around a qualified car audio installer

Guest Crazyfcuk

nothing but fluffly white stuff under there, actually come to think of it what happens if i get a puncture??? haha, na ive got a few of those short term tyre weld thingies in my car, havent had to use it yet (touch wood) so i cant really say if it will work or not, heres hoping it will

No probs with the wiring etc... 60 Amp fuse connected about 3" from battery, earthed to battery earth point on car etc...

i like the idea of buildouts from the odd shaped spaces on the sides of the boot. Will attempt the box re-build soon. No time this weekend though!!! WOOHOO!!!

Thanks everyone.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi ๐Ÿ™‹โ€โ™‚๏ธ. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? ๐Ÿ˜ƒ  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this ๐Ÿ™
    • Hi, Marek here ๐Ÿ™‹โ€โ™‚๏ธ. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
ร—
ร—
  • Create New...