Jump to content
SAU Community

Recommended Posts

Hey guys, first time poster, could really use some help, 

Spent some time doing this setup on my mates 34, one major thing was to keep all the stock stuff functionable an to fit with the aftermarket parts, (merely wanted a clean engine bay) 

Its come time to start it, but won't start....

I didn't use the stock TB, I put on the 88mm the plenum came with an wired up a raceworks TPS sensor, 

I have spark, I have injector pulse, could the elimination of the stock throttle body stop it from starting? 

Thanks in advance 

IMG_20200512_080525_186.jpg

Link to comment
https://www.sau.com.au/forums/topic/480386-r34-25detneo-wont-start/
Share on other sites

Got fuel aswell. 

Doesn't have traction control, but yeah running stock ecu harness etc, just aftermarket bolt ons, 

Is nistune the only option? 

Not really fussed about an engine light at the moment just want to get it running 

Edited by -R34GT-
2 hours ago, -R34GT- said:

Doesn't have traction control, but yeah running stock ecu harness etc, just aftermarket bolt ons,

The standard ECU thinks that there should be a TCS/ABS ECU present. If there is not, there will be fault codes.

The TCS/ABS CU, if it is present, will be freaking out because you have lopped off its throttle motor and position sensor. There will also be ECU fault codes because of this.

Nistune is the only way to make a standard ECU work nicely under this level of abuse. The Neo ECU is fairly obsessive compulsive about a few things.

8 minutes ago, KiwiRS4T said:

How big is that turbo? What ECU are you planning to run it with?

You say you have no ignition light...is  the starter turning the engine?

Engine turns over an everything performs as it should (minus the deleted TB) just doesn't start.

Its a gt35/40, now decided to go aftermarket ecu an loom, only made this post to see if anyone had a possible way to get the car to run an drive as it was with the factory ecu. 

45 minutes ago, Ben C34 said:

The car should run, unless you have done something weird.not well but should run. You sure you wired that  tps correctly

Thats what I would have thaught, should atleast start an run, an yeah I double checked the tps wiring, have the voltage aswell, 

Only thing that isn't hooked up is the original TB

 

images.jpeg

23 minutes ago, -R34GT- said:

Thats what I would have thaught, should atleast start an run, an yeah I double checked the tps wiring, have the voltage aswell, 

Only thing that isn't hooked up is the original TB

 

images.jpeg

And that is not going to work anyway, that is a switch not a sensor

Try plugging in old tps and traction control throttle body and see what happens. Trying random piggy backs is not going to help you.

 

 

 

Also what's the status of the iac set up?  Did that also fall victim the plan of having a "clean engine bay"

I tried plugging the old throttle body back in before doing the ecu, an it didn't do anything, no noise no movements no starting,

The hks was only put in to try simply cause I was being told that removing the throttle body an its components will cause the ecu to freak out, think it was mentioned in an earlier post too, 

An the Iac is still there an functionable

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...