Jump to content
SAU Community

Recommended Posts

Keep in mind the GT has a S15 rear end, so if you do get a diff, you want one that suits a S15.

In regards to Nismo, I kept digging - It seems the one I have is a 1.5 way, but acts like a 2 way. This is because when people say "1.5 way" Nismo diffs they actually mean the Nismo 1 way diff.

Or you could get a S15 Helical. General consensus is stay away from Viscous, and you'd have a hard time finding one for a S15 anyway.

so since this rear diff in the car is the stock gt version would it be considered the "open type" diff?

so this would be compatible? doesn't list r34?

I have emailed 8 different performance places that sell lsd, but none really can tell me what the car has. (had same issue with getting proper coilovers for a 98 er34 25gt)

would some part of the vin tell me exactly what the rear is?

https://www.ebay.com/i/372958523222?chn=ps&norover=1&mkevt=1&mkrid=711-213727-13078-0&mkcid=2&itemid=372958523222&targetid=4580840327039639&device=c&mktype=&googleloc=&poi=&campaignid=301076556&mkgroupid=1235851265215130&rlsatarget=pla-4580840327039639&abcId=1129776&merchantid=51291&msclkid=3401dc74086f178299f382b3e5315970

Edited by JC71

You have an open diff. It is a normal R200. I suspect that it has 3x2 stub axles, not the 5 bolters on the turbos. This is important, because when you buy a Nismo diff, you have to get the one to suit YOUR CHASSIS, because you need the stubs to match.

It is not hard to find a search result for a mechanical LSD to suit an NA R34.

You do not want a 2-way Nismo for the street.

 

8 hours ago, JC71 said:

sounds like general consensus is that the stock GTT LSD aren't that great and an aftermarket setup would be best. this will be primarily for drift setup, little street use, so would a 2 way still not be the way to go?

Nismo 2 ways are really a 1.5 way, and their 1.5 way is really a 1 way.

In any case, remember you want S15 gear.

Yes, everyone goes aftermarket with the odd exception. My "2/1.5" way Nismo was admittedly pretty amazing to slide around on like a dickhead when ... testing. I'd say buy it, but it fits a R34 Turbo and will not fit your car as you need a S15 'compatible' diff center.

6 hours ago, JC71 said:

any reason I should get a  GTT rear diff and put in a aftermarket LSD instead, of putting a aftermarket LSD into my GT rear diff?

No. No reason at all. Unless you like wasting money. Just buy a new centre to suit the open diff.

The differences are in the half shafts. They are all different lengths between the different standard diff types. Open = different lengths to VLSD = different lengths to the GTR mechanical LSD. So when you buy a Kaaz or Giken or Cusco centre for an open diff, it is slightly different to the same diff intended to replace a VLSD centre, because the splines are located differently. The new centre has to work with the half shaft lengths that you have.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...