Jump to content
SAU Community

Recommended Posts

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

wtf is an ork van :confused:

:P

The Bride rails bolt straight into a R32-R34 skyline. From there, the OBX seats bolt onto the top of the rails. The rails have 4 holes, but depending on which OBX seat you choose you may have to drill 2 holes in the rail. They are $295ea from Powerplay.

A cheaper option may be to start with generic style rails from somwhere like race and rally, but if you go that way you will need someone to help you mount the rails to the car. Mounting the seat to the generic rails is the same, 2 holes are OK, 2 you may need to drill.

Hope that helps :D, its pretty sad when the rails cost more than the seats ;) They are still a pretty good deal compared to the $1k + people ask for used Bride seats.....

yeah, thanks Nissan for creating the world's most uneven floorplan....you will definately need at least some custom fabrication if you go generic rails, both for the uneven floor and for the seat belt mount on the drivers side.

The Bride rails or a copy are the easiest option :(

yeah Powerplay have them in stock at $295 which I got the impression was pretty cheap. Its a shame you can't get them made up cheaper :)

  • 3 months later...

well....that very much depends on which ones you go for....

If you take a deep fixed bucket one like the Forza, they are a real pain in the arse to live with....don't buy something like these for a daily driver unless you really know you want them. On the other hand they are superb at holding you in place :P

On the other hand the reclining ones are more open and wider. So, they don't hold you as tightly but they are much easier to live with :D

  • 5 months later...

just measured my hips from point to point with a ruler here at work. about 55 centimetres. man i need a wide seat. duncan when are we gonna meet up next? i gotta try out your seat.

cheers, MARK

just measured my hips from point to point with a ruler here at work. about 55 centimetres. man i need a wide seat. duncan when are we gonna meet up next? i gotta try out your seat.

cheers, MARK

Hey Duncan, is Mark saying you got a fat arse mate?.....LOL

Ian

haha he is probably right to...for me I looked at the regular/narrow seats and just laughed :P

Anyway, Mark come out to the UAS day I will have the race car there, I have the forzas in it which are the same width.

midnight, unfortunately I can't get further photos than what are on the site....we don't carry any stock to take pics of, thats how we can do them so cheap :D The Forza in blue/black are mostly blue with black highlights (like the yellow/black on the pics).

I did come across some OBX seats at Autobarn, so you might find them there.....just don't pay their prices ;)

Hey negative.....rails are the biggest problem with aftermarket seats :P

The easiest way I've found is getting a set of the Bride rails, they bolt straight in and the OBX seats bolt straight to them.

  • 2 weeks later...

Hey mate the seat you tried was a Forza, which is the same width (410mm) as the daytona wide. Unfortunately that is as big as they make the fixed back seats.

If it was too tight there are always the recliners, they still have pretty good support but are roomier for the ample gentleman :D

OBX are great seats, these are awesome value, i have two black monaco seats in my 4dr 32 and they are great for all day driving and track use, and best of all they are on the standard r32 rails and are comfortable for the everyday driving. Good luck with the group buy.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Bah! I can't see the point in custom number plates at all. I went to the rego office, fished through a box of "premium" plates (the ones that had the "not as tall" option for the front plate) and picked the one that had a 32 in it. That's the limit of the effort and cost I will put into number plates. The only plate that I'd consider paying for would be 2332, but that's not possible here because it already exists from probably 90 years ago, and it would cost a fortune to obtain it, if it were available.
    • After chasing my tail with LS results..... and cheaper than a turbo swap... How confident are you that the dyno is accurate relative to other results? How fast is the car - What MPH does it actually run? Is this similar to what people running this power would expect?
    • Hi mate I am having an identical issue with my 98 R34 GTT. The engie suddenly cuts out under load at about 3-4k, black smoke out exhaust. Almost feels like traction control kicking in. No CEL but still going to check codes later today. Car was sitting in the shed for about 5 months before hand and only idled a few times, took her out with about 1/4 tank, filled up and thats when the issues started happening.  Threw on a spare set of coils/harness and checked plugs which was no help. Recently had fuel pump/filter changed so surely thats not the issue unless condensation in fuel, I just havent had the time to drain it It's running a hi flow turbo, bosch 1000cc injectors, walbro 450L, Z32, Nistune etc... All about 2000km old.
    • I always wonder where the obsession with legal/illegal spacing on number plates in the UK comes from. Because it comes up in comments in every UK-based video I see on youtube. From my point of view all of your plates look a bit odd. Just because there are no markings whatsoever. In Australia we have the state that has to be on it. In Europe you get stamps and state logos. Yours look a bit like a throwaway draft that people then stuck with. And attached with blu tack so that it falls off at the slightest disturbance. Not trying to hate, but it's interesting how things are done in different countries. Do you have to follow a lettering convention when choosing a custom plate?
    • Hybrid sounds like a supercharger... It's half a turbo, with a belt to drive it! Oh wait, they're just called super chargers...
×
×
  • Create New...