Jump to content
SAU Community

Recommended Posts

Hi guys, trying to suss out the Bluetooth in my car but it seems something is wrong with it.

when I go to pair my phone, my-car does not appear on the pairing screen or my phone. You can see what I mean in the images attached it says “*”, when it should be saying “my-car”.

Any help appreciated

C92064AA-0DFC-4526-AC7D-0BE7F6C78581.jpeg

B4AA2943-8CF1-41E2-9559-C7B075FC4D36.jpeg

I had no idea our vehicles had a "root" button. To think all this time I was paying for it!

Anyway, on a serious note, it seems that the Bluetooth ID of your vehicle has been overwritten by the previous owner (or yourself when sifting through the various settings). You can change that name again though I'm struggling to remember which submenu option it was in the Bluetooth menu. I'll get back to you on that.

Yes pretty much you are looking for * in the bluetooth pairing on your phone..

I have also attached the instructions for the V36 audio that I think you were looking for.

v36-translation2.pdf

10 hours ago, nickcorr said:

Yes pretty much you are looking for * in the bluetooth pairing on your phone..

I have also attached the instructions for the V36 audio that I think you were looking for.

v36-translation2.pdf 3.76 MB · 1 download

Ahh okay, so must be a different problem then as I’m not seeing * pop up on my phones Bluetooth. Could it be because I’m using iPhone X? I seen somewhere that later model phones don’t pair with skylines system.

Damn I got no other phone atm. Would you have any idea why my bluetooth would not be appearing? I've followed the guide setting passcode, entering my phone number etc but no success. Here’s what my Bluetooth info looks like, anything look wrong there?

BA6A1F24-1DF5-4E6B-9637-A6A6662E490C.png

01FACF25-1880-4DB6-9460-3592F8028AA5.jpeg

I suspect the asterisk for the Bluetooth name is an illegal character for Apple perhaps. I still haven't had the chance to go through the menus and determine where you can change the name back to my-car or whatever else you want to call it but that would be the first place I'd look for troubleshooting.

  • Thanks 1
On 02/12/2020 at 4:51 PM, eastsideroy said:

Ahh okay, so must be a different problem then as I’m not seeing * pop up on my phones Bluetooth. Could it be because I’m using iPhone X? I seen somewhere that later model phones don’t pair with skylines system.

I had an iPX and it was connecting fine for me. I'll try tonight with my iP12 and see if it still works. I gave up with BT audio since it sounded so eh.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just cut the bottom of the guard out. It's no longer got a big duct, to a sealed box, or a restriction. It has all the cold air from outside. Also, that cai you showed looks terrible. Bends are NOT good for go gos!
    • Like I said, "black magic" LOL In the end,  it is what it is, and hopefully, what this here knuckle head has done is an improvement and not a hindrance Not that I actually notice any negatives now, or that I will get any seat of the pants benefits when all is said and done, but best practice says I shouldn't be pulling intake air from the hot engine bay  Famous last words: I cannot see it being any worse than what it is at the moment 🤔
    • If the gases flowing in those two tracts had the same properties, you could maybe use such broscience. But the exhaust has a different composition, different normal density, different actual density (because of different normal density, and mostly because of the massively higher temperature), and different viscosity (again because of much higher temperature). Consequently, all of the fluid dynamics parameters that matter, that you calculate from these inputs, such as the Reynolds number, friction factors (for wall friction) and so on, are all incomparable.
    • And we shall have to presume that Canada is the same?
    • In the US almost everything is E10. It can't exceed 10% by much or fuel systems have trouble adapting. At the same time because MTBE, MMT, and TEL are all banned they need as much ethanol in it as possible to boost octane.
×
×
  • Create New...