Jump to content
SAU Community

Recommended Posts

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

it seemed like a terrible night for all....with chris recording a 12.3 at 120mph pretty much taking the cake..... we were all hunting that elusive 11sec barrier....but thats what drag racing is all about i guess...

4 doors do weigh more but it seems to be able to do burnouts and have better 60fts :headspin: :headspin:

on a more serious note i would like to commend everyone that rushed to get my car ready the night before the meet.... although my whole day was a mess..starting with butterflies and excitiment....to when i passed scruteneering and decided to put the BF radials on and find out they wouldn't clear my rear calipers :flamed: :flamed: ...

moving on at about 9pm bu-five-ta and doughy were kind enough to lend me there nittos...this brought a bit of excitement back into the night.... on the one run i had i did a 12.5 at 113mph with 1.96 60ft... it was nice to get a solid pass under me belt...then i snuck around for another pass...while staging i faulted....that was the start of the end :headspin: :headspin: knowing the nittos were nice and warm...hahahhaha i dropped it well in the red zone.... :headspin: :headspin: my clutch felt the :flamed: :flamed: ... what a night!!!

Hahaha Brett was the moral crusader and didn't want a part of it, the time came from Merli saying you ran it (it was the celica before you?). In my defence I'll say I had burnout and launch envy, the launch on the second run was pretty solid - you could hear the tyres rip!

Bo was the king of last night. 1.4 60' and a 45deg wheelstand launch. Can't wait to see the photos this afternoon.

Burnouts next time please gentlemen! :( Don't be afraid of the brake-job.

Adrian

Hahaha Brett was the moral crusader and didn't want a part of it, the time came from Merli saying you ran it (it was the celica before you?). In my defence I'll say I had burnout and launch envy, the launch on the second run was pretty solid -  you could hear the tyres rip!

the launch did rip alright...all the way into the twin OS :( ......... its a coincidence after i take two...illl be needing one and u dont have one....drag racing sux!!! to much $$$$ required

drag racing sux!!! to much $$$$ required
Try circuit racing then which is considerably more than a 400m stretch :(

I've driven away from each of my ~40 drag runs without an issue at all. With circuit racing my avg is ~$2k damage per/trackday :(




  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...