Jump to content
SAU Community

Recommended Posts

Hello everyone,

 

I'm recently opened my rb25de Neo valve cover (Exhaust side) and I noticed that the wall where the rocker cover gasket sits in was oxidized and fell off.

my question is can this be fixed?

or should i just swap it with the RB20de neo cover and are the rb25de neo and rb20de neo covers the same?

IMG_20220104_174329.jpg

Edited by romel

First things first... What. The. Living. f**k? How? Just how? Have you been parking it in an acid bath?

2nd. Yes, maybe a talented welder could build that back up and then machine it flat. But....you would only do that for a vintage car where getting a replacement is zero chance.

3rd. Yes, it is almost certain that all the Neo (turbo/NA/20/25) covers should fit.

On 1/4/2022 at 11:30 PM, GTSBoy said:

First things first... What. The. Living. f**k? How? Just how? Have you been parking it in an acid bath?

2nd. Yes, maybe a talented welder could build that back up and then machine it flat. But....you would only do that for a vintage car where getting a replacement is zero chance.

3rd. Yes, it is almost certain that all the Neo (turbo/NA/20/25) covers should fit.

That was my reaction to bro "First things first... What. The. Living. f**k? How? Just how? Have you been parking it in an acid bath?" 

I still cant believe what I saw this afternoon.

This car has been sitting for approx. 10 years. I pulled it out of a ER34 which I bought for $250

So I was thinking to take the engine apart and check if its still good if yes I was thinking of rebuilding it and swapping it with my RB20de Neo. also down the road I was thinking to convert it into a Rb25de-t.

someone went already to buy some parts of this car and they left the bonnet open I think for years so I hope not to see any other surprises down the teardown.

the car came with the auto Trans, eco, wiring, cluster the RB25de neo

WhatsApp Image 2022-01-04 at 11.52.30 PM-5.jpeg

WhatsApp Image 2022-01-04 at 11.52.30 PM-4.jpeg

WhatsApp Image 2022-01-04 at 11.52.30 PM-3.jpeg

WhatsApp Image 2022-01-04 at 11.52.30 PM-2.jpeg

WhatsApp Image 2022-01-04 at 11.52.30 PM.jpeg

WhatsApp Image 2022-01-04 at 11.52.29 PM-3.jpeg

WhatsApp Image 2022-01-04 at 11.52.29 PM-2.jpeg

WhatsApp Image 2022-01-04 at 11.52.29 PM.jpeg

I'm pretty speechless. I don't know if you're attempting to rescue that car..

or you have another car, and you're using the one pictured as a parts car and salvaging as many as possible things from it...


Either way this is going to be an uphill battle, I am suprised there is a Skyline (or two?) in Surname!

  • Like 1
On 1/5/2022 at 9:35 PM, romel said:

Lol are you speachless to bro? 

 

I will keep you guys updated during the teardown. 

I also noticed this on my cams is it normal?

 

Are you worried about the grinding marks on the shaft or some wear marks on the lobes? The grinding marks may or may not be factory. It is common for there to be some grinding marks along the casting flashes on those parts of the cam. Yours look like they were fairly aggressively done, but there's nothing to suggest that it's not as-factory. They might have been touched up by someone who thought that further removing casting flashes would improve the cams (when it really wouldn't).

Have a google image search for RB25 cams (and also google for RB20 and RB26 cams) and look at the variation is what can be seen there.

  • Like 2
On 1/6/2022 at 12:09 AM, Kinkstaah said:

I'm pretty speechless. I don't know if you're attempting to rescue that car..

or you have another car, and you're using the one pictured as a parts car and salvaging as many as possible things from it...


Either way this is going to be an uphill battle, I am suprised there is a Skyline (or two?) in Surname!

Nah man i have another r34 and i am trying to use the orange skyline as a parts car and salvage as many as possible. I opened the rb25de neo engine yesterday and there are a lot of suprises in the engine. Will upload the videos in a minute. 

 

Yes there were alot of skylines like 10years back in suriname. But maintenance is hard for the people here so the cars end up dead or scrapped. I have a college who has a r34 sedan with a rb25det neo engine and nismo cluster etc. 

  • Like 1
On 1/6/2022 at 12:37 AM, GTSBoy said:

Are you worried about the grinding marks on the shaft or some wear marks on the lobes? The grinding marks may or may not be factory. It is common for there to be some grinding marks along the casting flashes on those parts of the cam. Yours look like they were fairly aggressively done, but there's nothing to suggest that it's not as-factory. They might have been touched up by someone who thought that further removing casting flashes would improve the cams (when it really wouldn't).

Have a google image search for RB25 cams (and also google for RB20 and RB26 cams) and look at the variation is what can be seen there.

Yes man i was worried about the grinding marks on the shaft. Thank you so much for the breakdown. Really appreciate it.

 

  • 5 months later...

Dear all the jungle find engine rebuild is coming together.

Thank you all for your advise. 

I attached a few videos links of whats going on. 

https://vm.tiktok.com/ZMNNtExpk/?k=1

https://vm.tiktok.com/ZMNNtxFRW/?k=1

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...