Jump to content
SAU Community

Recommended Posts

Hey SAU team, 

Does anyone have complete Sunroof kit from a R33 GTST Skyline? 

Even if the Glass is broken as I have the Glass in tact, see photos.  

Or can you or someone you know repair the one I have. 

One of the struts is bent and there is a Fibreglass section around the glass, like a seal that has been shattered (see photo, not the best photo but hope you get the idea) all after our Car was broken into. 

So either a complete Kit including seals & firebeglass surround, or someone who can fix what we have and new rubber seals also, would be amazing. 

Or worst case, we will have to replace it with a sliding Sunroof or something that can be built custom to suit the hole but cost effective. 

If anyone knows a Sunroof Guru that is good but cost effective? 

Would love to hear some solutions. 

Thanks heaps team!!! 

We r in Melbourne. 

🚘 👍🇦🇺

Resized_20220313_183409_404961490662616.jpeg

On 4/12/2022 at 10:00 AM, dyl33 said:

Your best bet is to go a quality aftermarket sunroof or if you have heaps of money Nissan still make most parts I believe https://nissan.epc-data.com/skyline/ecr33/3915-rb25det/body/736/

Is it possible to (not in a money-no-object sense) to get an aftermarket sunroof to fit the stock cut-out? I do wonder because I've been dealing with sunroof trauma for about 9 months now on my R34 and have always seen the aftermarket ones advertised. It would be great to get an aftermarket system that retains the stock glass. 

On a side-note, some of the sunroof parts from Nissan are discontinued. I've occasionally seen R33 sunroof assemblies floating around international auctions whilst on my hunt for an R34 one.

On 4/12/2022 at 5:37 PM, GoHashiriya said:

Is it possible to (not in a money-no-object sense) to get an aftermarket sunroof to fit the stock cut-out? I do wonder because I've been dealing with sunroof trauma for about 9 months now on my R34 and have always seen the aftermarket ones advertised. It would be great to get an aftermarket system that retains the stock glass. 

On a side-note, some of the sunroof parts from Nissan are discontinued. I've occasionally seen R33 sunroof assemblies floating around international auctions whilst on my hunt for an R34 one.

I'll keep my eye out for your R34 if you can do the same for my R33? 

 

On 4/12/2022 at 6:17 PM, EliseT said:

I'll keep my eye out for your R34 if you can do the same for my R33? 

Haha sure. One of the guys here pointed out a complete 34 assembly in Aus but shipping was outrageous. So for me it has to be in Europe or Japan.

FYI, there is an HCR33 sunroof for sale on yahoo auction for 10,000 yen:

https://page.auctions.yahoo.co.jp/jp/auction/s1041724665 

image.thumb.png.6bcab3b79ea0ef8ab35651ec2c5465da.png 

 

This is a Webasto Hollandia 300 in an R33. Seen them in lots of 33's & 34's

20220412_183601.thumb.jpg.f7ed84574ff5b44588631e53cb7010c9.jpg

Uv glass, auto close, rain sensor etc.

On 12/04/2022 at 5:37 PM, GoHashiriya said:

Is it possible to (not in a money-no-object sense) to get an aftermarket sunroof to fit the stock cut-out? I do wonder because I've been dealing with sunroof trauma for about 9 months now on my R34 and have always seen the aftermarket ones advertised. It would be great to get an aftermarket system that retains the stock glass. 

On a side-note, some of the sunroof parts from Nissan are discontinued. I've occasionally seen R33 sunroof assemblies floating around international auctions whilst on my hunt for an R34 one.

Would be easy to find one that fits, not sure why you would want to find one that retains the factory glass. 

I think most of the major parts are available from nissan at retarded prices.

On 12/04/2022 at 7:47 PM, GoHashiriya said:

 

Haha sure. One of the guys here pointed out a complete 34 assembly in Aus but shipping was outrageous. So for me it has to be in Europe or Japan.

FYI, there is an HCR33 sunroof for sale on yahoo auction for 10,000 yen:

https://page.auctions.yahoo.co.jp/jp/auction/s1041724665 

image.thumb.png.6bcab3b79ea0ef8ab35651ec2c5465da.png 

 

25+ year old 2nd hand sunroof what could go wrong.

On 4/12/2022 at 7:11 PM, dyl33 said:

This is a Webasto Hollandia 300 in an R33. Seen them in lots of 33's & 34's

Uv glass, auto close, rain sensor etc.

Would be easy to find one that fits, not sure why you would want to find one that retains the factory glass. 

I think most of the major parts are available from nissan at retarded prices.

25+ year old 2nd hand sunroof what could go wrong.

I’ve seen those for sale over here too. The thing is, I don’t particularly like the idea of some guy I can barely communicate with cutting up the roof panel. So I should rephrase my question to: is there an option to fit a third party sunroof in the factory sunroof-spec roof panel without cutting up the OEM roof panel?

Yep, OEM prices for sunroof components are at dumb prices. >20k yen for one of the pulley wires.

It’s possible a factory 25yr old sunroof is better than a post-break-in damaged sunroof assembly. I’d go for it provided the local hoarders don’t bid into the extremes for it. 

On 4/13/2022 at 4:08 PM, GTSBoy said:

I would ask the question....is it possible to fix the roof with some steel to replace the bloody stupid glass that someone** jammed in there mistakenly thinking it was a good thing?

**Yes. I'm including Nissan.

Yeah, I've thought about this too. For me, this would be a back-in-the-UK kinda thing as I have the issue that basically no one has that they can't properly converse with body shops and subsequently be able to trust them.

I do like the extra light that comes through from having a 20-odd kg scrap assembly at the highest point of the car though. 😒 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...