Jump to content
SAU Community

Recommended Posts

Just wondering if anyone else out there has had water in the boot of their R33 coupe???

I've had it in mine, and after a few weeks of sealing all the known/visible holes, it was still getting water inside.

Then today found out it was coming through the welded on piece of steel on the inside of the boot, above the passenger side taillight. I couldn't get the taillight out to fix it totally due to all the black silicone stuff holding it in. So all i've done is seal up all the steel joins in the boot. Hopefully this works.

ps. anyone else's r33 turbo go past the 180 speedo, with a standard ecu and no speed cut ???

Link to comment
https://www.sau.com.au/forums/topic/48358-r33-boot-filling-with-water/
Share on other sites

bah. standard speed cut happens more toward the 190'ish anyway...i mean. urr.. so I've been told :D

As for the water, yep.. had the same thing too... also, the spare tyre forms condensate on cold nights with the rubber and stuff... that's my theory anyway, as there is definitely no leaks in my boot...

dam boats love the water!

dunno about the cut wire....went to 190 then had to back off *shrugs*

i had my spare condensate as well. Always thought it was the heat from the exhaust (no heat shielding). The rubber gromets don't leak either.

Well i keep checking the boot, and no water.

So that's the leak (the passenger side taillight).

Patch it up, let the silicone dry, then all is good.

Now wait till it rusts a hole through...hehe

Anyone taken out the taillights??? I took the nuts off, and then tried to get the light out, but it felt like it really didn't want to move. What's the business with it ???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'll just leave this with, holy shit, those cars at work are awesome, and this will look wicked!
    • Could you modify this duct so instead it pushes the extra air through the radiator too and not down and out? For temps, I know it's not the greatest idea, but as a bit of a last resort, you could use a very intermittent misting spray onto the front of the coolers/rad. You don't want to be soaking them such that water is dripping off, but a small most on/off so that the water evaporates. That point of it constantly evaporating, rather than being soaked in water, will pull a LOT of heat out of the cooler. I'm literally thinking just the little mist sprayers for a garden from Bunnings. Being in a low humidity climate it will help even more! The other trick if you want to be ghetto is some shade cloth hung in the opening, and keep it wet. Pretty much now it's acting like an evap cooler on a house, but cooling the air you need to use to cool the radiator...   On a topic to think about too though, when air enters through the bumper, is it all nicely ducted from the edges of that opening back at a nice angle, or is it like most cars, and the edge of the opening just stops, and suddenly it's wayyy wider behind that? If it does the later, get it shrouded out at nice angles. When that opening changes too rapidly, it can actually cause a high pressure zone between the front bar and radiator, and limit air flow into that area, which means less air for cooling, as it effectively stalls the air, AND adds to drag...
    • Do you have any before and after photos? That's $200 just for the hydro blasting?
    • It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
×
×
  • Create New...