Jump to content
SAU Community

Recommended Posts

Remove ac condenser, replace with 42 volt alternator from ebay, anywhere from $300-$2500

Test and adjust 

My vote is high rpm reliability test of stock condenser 

What is the worse that could happen?????

I've had this type of conversation lately with a couple of peeps on here.

The electric compressor is a good idea to prevent the on-off clutch problem from the compressor potentially cycling while at high revs. Granted, in the usage model of charge cooling, it would likely be stuck in the ON condition. But in the OP's usage case, it could quite likely cycle on-off when just working as an AC, even though he might be pooping out 7k rpm at the time. So, yes to elec comp on that basis.

But perhaps the better aspect of an elec comp is that you really need a 42V battery there for the alternator to run against. Now, ignoring the weight penalty of having to have another 18 cells of lead acid battery on board (in addition to the native 12V battery) (or potentially something like a lithium battery) you could then actually not even load the alternator while trying to extract max power from the engine. You'd use a clever charge controller between the 42V alt and the 42V battery that would allow charging on overrun and partial throttle, but reduce alternator current draw when above X% throttle opening, or some more sophisticated arrangement, if desired. Then you can still get the comp to run to produce the cools when you need it to cool your weary body (or the air charge) by leaning on the battery for part of the lap.

And so on, and so forth. There's a dozen things that you could come up with like that if you really wanted it.

On 31/05/2022 at 3:21 PM, GTSBoy said:

 

 

And....no. You're not going to draw 3ish kW of power from a 12V supply.

BEVs and hybrids that use electric AC compressors are running them on the 42V standard that sort became the thing when such high power demand applications started to become a thing, or even higher voltages. This because..... they have higher voltage available.

You wanna rig up a special alternator capable of putting out 42V, then yeah, maybe.

True, didn't think of the voltage they run at if using one direct from an EV. And the cost. 

Not sure what the aftermarket is like for stuff like that, obviously electric water pumps and ps pumps are popular, but they have a demand among track and motorsport cars hence the options exist. AC pumps however, not so much

On 5/31/2022 at 2:03 PM, Chopstick Tuner said:

obviously electric water pumps and ps pumps are popular, but they have a demand among track and motorsport cars hence the options exist

And they only draw 1 to 2 digits of Amps. AC compressors would draw 3 digits (at 12V).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
    • Stop looking at the garage floor, and turn the radio up a bit louder if there's any strange noises...
    • No. Turbo shuffle and surge/flutter are not the same thing. Specifically, on a GTR, turbo shuffle has a definite meaning. On a GTR, the twin turbos are assumed to be the same thing and to operate the same way, exactly. In reality, they do not. Their exhaust sides are fed and exhaust a little differently, to each other. Their inlet sides are fed and exhausted a little differently, to each other. Consequently, when they are "working" they are often at slightly different points on the compressor map compared to each other. What this means, particularly when coming on boost, is that one of them will spool up and start producing extra flow compared to the other, which will put back pressure on that other compressor, which will push the operating point on that other compressor up (vertically). This will generally result in it bumping up against the surge line on the map, but even if it doesn't, it upsets the compressor and you get this surging shuffle back and forth between them That is "turbo shuffle" on a GTR. It is related to other flutter effects heard on other turbo systems, but it is a particular feature of the somewhat crappy outlet piping arrangement on RB26s. There are plenty of mods that have been attempted with varying levels of success. People have ground out and/or welded more material into the twin turbo pipe to try to prevent it. Extending the divider inside it works, removing material doesn't. There are aftermarket replacement twin turbo pipes available, and these exist pretty mush purely because of this shuffle problem.
    • You can temporarily* use lock collars to keep it in place until you can do the bushes, back the nuts off, slide them in, snug back up. *temporarily is often for ever
    • Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
×
×
  • Create New...