Jump to content
SAU Community

Recommended Posts

Hi 

I’m looking at buying a 2004 Nissan Skyline 350GT V35 Auto with 115,000km 

Imported back in 2013 by a small import business only had 1 owner in Aus 

also would I have to get parts from Japan or do all the engine parts from the 350z fit 

Thanks 

 

Edited by Jack151
Link to comment
https://www.sau.com.au/forums/topic/484213-questions/
Share on other sites

  • Jack151 changed the title to Questions

Engine, transmission, suspension, brakes, all straight from a 350Z, it is really only the body that is different.

'Small import business' scares me, I would get my own japan history check done before buying, make sure it isn't a repaired wreck and make sure the KM when it left Japan line up with what is on the oldest Australian service record.  don't trust any history document supplied by the importer, or documents the seller got from the importer.

  • Like 1
  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/484213-questions/#findComment-7972643
Share on other sites

As said, if the km are too good to be true (and they are by half), then it might be wound back. Get a reputable odo check company to do a history on the car.

 

Parts are easy, generally - most parts are available locally, or at worst out of Japan or the USA.

  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/484213-questions/#findComment-7972689
Share on other sites

6 hours ago, marcus1070 said:

How would you do this check? is there any registry site?

If you google 'Japan car history check', there is at least one main site, it isn't free though.  It will catch some of the slimy tricks like shady operators in japan buying damaged cars at auction, doing a quick repair job, winding back the speedo, then re-auctioning them, of course the dodgy importers here only show you the final auction sheet, not the first one.

 

12 minutes ago, Jack151 said:

Is the automatic transmission in the 2004 Nissan skyline 350gt V35 durable/long lasting?

I don't have an auto, but I don't believe they are a known problem.  But like any auto, if you neglect it, it will give you problems.

Link to comment
https://www.sau.com.au/forums/topic/484213-questions/#findComment-7972715
Share on other sites

3 hours ago, sonicii said:

If you google 'Japan car history check', there is at least one main site, it isn't free though.  It will catch some of the slimy tricks like shady operators in japan buying damaged cars at auction, doing a quick repair job, winding back the speedo, then re-auctioning them, of course the dodgy importers here only show you the final auction sheet, not the first one.

 

I don't have an auto, but I don't believe they are a known problem.  But like any auto, if you neglect it, it will give you problems.

Not going to thrashing it but a couple pulls here and there just want to make sure there wearnt anything wrong with the auto trans for the certain model 

Link to comment
https://www.sau.com.au/forums/topic/484213-questions/#findComment-7972716
Share on other sites

13 hours ago, Jack151 said:

Just double checking does anyone know for sure that the 2004 Nissan Skyline 350gt is green p plate legal 

It varies state to state. By chance, I accidentally came across an Australian wide one when checking for something else (for a 370GT, not legal for P's in NSW). I couldn't find that page now. Here is one for NSW

https://www.nsw.gov.au/topics/driver-and-rider-licences/driver-licences/p1-and-p2-prohibited-vehicles/prohibited-vehicles-search-results?page=14&make=Nissan&model=Skyline

I found it using the search terms:"2004 Nissan Skyline 350gt is green p plate legal". Basically your question. I know the 370GT is not for P's in NSW. When I was looking for my 3760GT, one was being sold by a P plater, and was actually bought by another member here, that used it as a bargaining angle. But there are a number of states that it is. I think on the page I saw it was Power to Weight ratio.

 

EDIT: Just closing my other browser windows, and came accross this before i closed it:

https://www.carsguide.com.au/car-advice/p-plate-legal-cars-in-australia-81275

Edited by Vee37
added URL
Link to comment
https://www.sau.com.au/forums/topic/484213-questions/#findComment-7972857
Share on other sites

The 2004 Nissan skyline 350GT I was looking at buying and as I went to view it they said they imported it in 2013 and the owner is too old to drive now so he sold it back to the import company where he got it from. Also unfortunately there aren’t any service records. But they said it has always been serviced while they have owned it not sure about the old bloke tho. 

so I’m kinda stuck not sure if it’s worth the risk I could get a mobile mechanic to do a full check and if it turns out to be healthy if it’s worth $14,250 

 

 

 

Edited by Jack151
Link to comment
https://www.sau.com.au/forums/topic/484213-questions/#findComment-7972917
Share on other sites

On 11/29/2022 at 9:21 PM, Jack151 said:

But they said it has always been serviced while they have owned it

How long have they owned it?

 

It's an 18 yr old car with questionable history that's not cheap. Hope that puts it in perspective.

  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/484213-questions/#findComment-7972940
Share on other sites

On 11/29/2022 at 9:51 PM, Jack151 said:

The 2004 Nissan skyline 350GT I was looking at buying and as I went to view it they said they imported it in 2013 and the owner is too old to drive now so he sold it back to the import company where he got it from. Also unfortunately there aren’t any service records. But they said it has always been serviced while they have owned it not sure about the old bloke tho. 

so I’m kinda stuck not sure if it’s worth the risk I could get a mobile mechanic to do a full check and if it turns out to be healthy if it’s worth $14,250

Redbook values have always seemed on the cheap side whenever I have looked at them. I am guessing they are more dealer/trade orientated. But, a print-out may help as a bargaining chip.

https://www.redbook.com.au/cars/details/2004-nissan-skyline-350gt-v35-auto/SPOT-ITM-265550?Cr=1

 

I found the KM made a big diff to price, but you need to confirm the value. My 350GT only had 23,000 on the clock, but the floor mats were waaaaay to worn for so low a odometer reading (and I assumed it was wound back). Out of the 5-10 that I drove, it felt the best. Some of them really felt "tired". . A few years later of owning the car, I found the JP auction papers (in the car!) and they showed that the car has been would back 30k. At least at that one point. 23k on odo, 50k on auction

Edited by Vee37
Link to comment
https://www.sau.com.au/forums/topic/484213-questions/#findComment-7972984
Share on other sites

On 11/29/2022 at 6:51 PM, Jack151 said:

The 2004 Nissan skyline 350GT I was looking at buying and as I went to view it they said they imported it in 2013 and the owner is too old to drive now so he sold it back to the import company where he got it from. Also unfortunately there aren’t any service records. But they said it has always been serviced while they have owned it not sure about the old bloke tho. 

so I’m kinda stuck not sure if it’s worth the risk I could get a mobile mechanic to do a full check and if it turns out to be healthy if it’s worth $14,250 

 

 

 

How do you go? 

Did you get a mechanic to check it out?

Link to comment
https://www.sau.com.au/forums/topic/484213-questions/#findComment-7973204
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...