Jump to content
SAU Community

Where to replace an ignition key which activates an alarm system ?

samuri

By samuri,
in General Automotive Discussion

 Share

Recommended Posts

samuri Rising Star

samuri

Posted
Posted

Where can I go to  replace  a remote ignition key which activates an alarm system and also  opens and locks the. doors ? 

 

The key was stolen but we have a duplicate which engages and disengages the alarm system , locks the doors and starts the car .

I am not even sure if what I have was standard  for the NM35 or is an aftermarket alarm. 

If after market it was installed in Japan.

I have a short  black thing  on my key ring( a RF transponder??????) about3 cm longhand 10mm wide which has to be near the ignition for the car  to start

 

 I have a personal import NM 35 so the Nissan dealer doesn't want to deal with this vehicle 

regardless of the issue.!!!!!

thanks in advance

 

 

Duncan Grand Master

Duncan

Posted
Posted

When you say "personal import" do you mean you are aware of all the importing steps and no-one added the transponder in Australia? We had a fob like that on our old Cube which was for an immobiliser installed by the importer (Just Jap)

If you are certain that fob was on the keys in Japan then it is a bit trickier to find someone local who can help.

In any case, if you want a single fob to remote central lock and immobilise, what you need is a competent local installer to put a new system in as your current remote central locking is on the key and the immobiliser is a separate system on the fob

Duncan Grand Master

Duncan

Posted
Posted

Good detail! 

So do you need the central locking key, the immobiliser fob, or both?  The key is a standard nissan thing from the period so just pick up a blank one that looks the same of ebay and get it cut to suit and coded at the same time (just need someone who can do late model nissans, the process is all the same). 

If you need the fob, that is a question for the autowatch dealer to supply and code

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jtha7
      [Fuel pump] Is upgraded bulk head connectors or relay mod needed for fuel pump upgrade?

      By jtha7 · Posted

      Hi guys my 94 r33 gtst fuel pump has gone out. I have a walbro 525 ready to go in but am unsure if I need to upgrade the fuel tank bulk heads? Ive heard that others have issues with the stock wiring melting... Ive seen alot of people recommend this: https://frenchysperformancegarage.com/products/fpg-nissan-skyline-r33-r34-silvia-s14-s15-billet-fuel-tank-bulkhead-hat-top-an6-with-high-current-connector-apex-2-8-delphi-fpg-100?variant=42873255198898 My current pump that stopped working is aftermarket but I had no relay mod or upgraded connectors. Need some advice please. TIA
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      It’s new. It’s the cd009. I did take the transmission apart to mill down the bellhousing and had both housings come off the gears so wondering is something isn’t in right. I am running redline. I can get it in gear running too but it’s just not easier and it’s almost like 2, 4, 6, and reverse all the back gears aren’t happy going in
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      I’ll remember that as a last choice. It’s brand new
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Got keys and did a walk around the yard planning the landscaping works with the family that I will be doing Main effort: remove all the woodchip in the gardens that are around (attached) to the outside of the house and replace with 10mm blue metal, having woodchip close to the house is a recipe for inviting white ants, currently there are no white ants within the block and I would like to keep it that way I'll be buying some large raised garden beds to grow veggies and stuff, and the woodchip will be mulched with everything else that gets dug up, pulled out, or cut down during works Next will some minor drainage and landscaping maintenance up one side of the house, where the fuse box, AC, and solar stuff will go, about 12 mtrs long by 2 meters wide, I'll break up the soil, add gypsum and then I'll dig in a French drains about 300mm deep x 300mm wide and fill it with agg pipe and blue metal, then level out the whole area with a 50mm layer of blue metal, the soil, whilst currently pretty compacted, will break up well with the gypsum to aid in drainage, I'll then cover the area with a 50mm layer of more blue metal In saying this, the drainage issue is minor, but that little hidden away area down the side is untidy and weedy, and as all of the main elec stuff is there I want it neat and tidy to appease my OCD Again, the material excavated from the French drains with be added to the garden bed mulch, as will some rose bushes and some other crap looking garden plants, and a old apricot tree that is looking worse for wear The apricot tree is currently in a little roundish garden bed that is in the middle of the back yard with few other crappy looking plants around it, that will all be removed, levelled, re-turfed, and is a perfect spot for a hills hoist There is also a area about 3m x 2m between the rear fence and shed that will get some attention, it looks like some stuff was stored there and the grass is dead, that will also get broken up and mulched, and is a prime spot for a pumpkin patch I've guestimated that I'll need: 3 tonnes of blue metal, 12 meters of agg pipe, 5kg of Gypsum, and a hills hoist, so a few bags of concrete as well to set it in place (the house currently has one of those pull out 4 line jobs, whilst it works, I want a retro old school hills hoist), I am also going to run some chickens, there's a great spot for a coop, so a chicken coop to suit 4 of those lovely egg laying bitches will also be on the job card That should keep me busy for a while, and will finish off the back yard ready for a early spring planting of some veggies and berries  Once the main effort is done I'll start out the front, there's a large rock garden that could use some TLC, but that is only minor works Should be fully moved in within 2 weeks, the landscaping works will start then Fun times, retirement is good  
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      It happens, that's what your single stage filler is used for.  If it is still visible after the 3 coats of 2k primer, it will be visible after the paint is laid down.  Its hard to give 100% perfect advice without being there in person, I'm very tempted to say stop where you are, fill your pin holes with a single stage putty first then keep going. 
×
×
  • Create New...