Jump to content
SAU Community

Recommended Posts

i went to my machanic the other day as i've been noticing a strong fuel smell from my car, he noticed it as well and before asking me what petrol i use he says you use BP ultimate don't you, he then told me that theres been a few problems with the fuel and the seals on fuel pumps, a few people using the fuel have had this problem and have had to replace fuel pumps but it not being covered by insurance due to "contaminated fuel" just seeing if anyone has heard of this latley??

Link to comment
https://www.sau.com.au/forums/topic/48512-bp-ultimate-problems/
Share on other sites

Check that the fuel cap is secure, and that there are no leaks near or around. Also jack up the car and check underneath where the tank is for any leaks, could just be a small leak that can easily be plugged up...

you wouldnt want that to catch alight from the exhaust.....big dramas....

Let us know what you find out..

I work at Bp shepparton here in VIC and our BP ultimate is far better than those that are in the city, the reason you get bad fuel is that if you live in urban areas , the simple answer is more people use fuel and with a 5000 litre fuel tank the last 1000 is basically dregs take my advice fill up in the early hours of the morning when they've just filled the tanks or fill up in stations not used as much, those out of the way bastard truck stops

Patchy, I am sure there is some truth in what you say, but I would be surprised if 20% of a tanks contents could be considered to be "dregs". If station tanks, pumps and filters are properly maintained, this should not be an issue. Clearly it is with some, though.

Cheers.

it would not be 20% of tanks if you considered that premium, unleaded and diesel all house about 35,000 litres. Bp ultimate is the smallest tank and about those filters i have been working at bp for over 12 months and have never seen any cleaning done to the tanks or the filters so unless there self cleaning... How clean is your petrol?

i have managed a servo, and let me ask you, have you ever seen any big pumping trucks flushing the tanks out to clean them, i have never heard of it being done at quix(mobil) EVER. never personally seen or heard of them being cleaned and at quix as long as the water is below 1000L it is deemed clean, reassuring huh?

Hi guys. I have a little knowledge of refineries and the chemistry involved. My understanding is that the BP Ultimate is refined as a 98 octane fuel, which means that the crude cut used as the base fuel is at or near 98 octane. Whereas the Shell Optimax is a base 95 octane fuel (or maybe 96), which then has various additives mixed in to boost the octane level. This way, Shell save on refining costs, but have more additive costs - the refining costs will be the bigger of the two!

Any gasoline fuel, if left for a long period in an atmospheric tank (which all station tanks are), will "weather" - i.e. they will gradually lose the more volatile components (it's all a matter of vapour pressure and the tank "breathing"through the vent). This will generally cause the octane of the weathered fuel to be reduced.

Hope this helps.

Cheers.

Some early R32 and R33 Skylines arn't preimum fuel cars and therefore you shouldn't be using preuim fuel anyway, if your Skyline is after 1995 then they will all be preimum only cars, where as before that it's a mix so you should look up your manual that check that out.

Some unleaded cars will have problems with preimum fuels as they will burn out filters etc quicker than normal.

Also about the fuel:

BP Utimate and mobil Vortex, are 98% ron fuel they don't have any cleaners in them.

Shell optimax is 98% ron fuel but with a cleaner in it, so it will help to clean out your fuel system.

I've run Shell optimax in my own unleaded car it ran much better but Shell state that you shouldn't use premium fuels in unleads more more than once or twice in a month as it can cause problems for the engine.

Also had a WRX and ran all 3 types of fuel through it and the Shell fuel ended being the best out of the three providing much more power and resposne.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...