Jump to content
SAU Community

Recommended Posts

Hey there,

I've searched but cannot find that answers I'm really looking for, for my situation.

 

I've had my R32 GTR for about three weeks now, it's mainly stock except for an exhaust and apexi intakes. I removed the boost restrictor in the line to the boost solenoid. The issue is, some times it's great and gives me about 14psi of boost, and sometimes it gives what feels like stock or less than stock boost. It can do this on the same drive, with nothing apparent changing, it just seems totally random if it will be the 14psi or the 7psi-10psi.

 

Has anyone had experience with this or have an idea what could be causing the inconsistency?

 

Thanks heaps in advance for the help, this forum has been a huge help already 🙏

I guess there are lots of old parts that could cause that these days including the wastegates themselves.

However, first question, is the car running smoothly when it only makes 7psi instead of 14, or is there some hesitation as well? A missfire as the car comes on boost is quite common and could limit the boost it makes

BTW, well done finding a mostly stock GTR after all this time!

6 hours ago, Duncan said:

I guess there are lots of old parts that could cause that these days including the wastegates themselves.

However, first question, is the car running smoothly when it only makes 7psi instead of 14, or is there some hesitation as well? A missfire as the car comes on boost is quite common and could limit the boost it makes

BTW, well done finding a mostly stock GTR after all this time!

I'll have a look into the waste gates, thanks mate 

 

It runs completely smooth regardless of how much boost it decides to make, on the 14 psi it feels great actually

 

Thanks mate! Took a while to find the right one but I got there. Thanks for your reply 

13 hours ago, Nizzy said:

Hey there,

I've searched but cannot find that answers I'm really looking for, for my situation.

 

I've had my R32 GTR for about three weeks now, it's mainly stock except for an exhaust and apexi intakes. I removed the boost restrictor in the line to the boost solenoid. The issue is, some times it's great and gives me about 14psi of boost, and sometimes it gives what feels like stock or less than stock boost. It can do this on the same drive, with nothing apparent changing, it just seems totally random if it will be the 14psi or the 7psi-10psi.

 

Has anyone had experience with this or have an idea what could be causing the inconsistency?

 

Thanks heaps in advance for the help, this forum has been a huge help already 🙏

Do some ECU logging. Consult cable + Nissan Data Scan 1. Try to record a 14 psi pull then a 7-10 psi pull. Make sure you record airflow + airflow RH, throttle, RPM, injector, ignition timing, and wastegate solenoid. If the solenoid indicates it's on in both cases and you aren't on knock maps then my first suspicion is the wiring to the solenoid might be intermittent. Next step from there is to unplug the ECU, get some long wires and verify the wiring from the ECU to the solenoid maintains solid contact/low resistance, jiggle the wires while probing to see if it drops out at all.

If all of that checks out you should try capping the plenum to wastegate hose, then test with 3/5/7/10 psi regulated pressure and figure out the minimum pressure needed to barely move the wastegate actuator, then how much is needed to really get it to swing open. The R32 engine manual has a more specific spec for these things but if it's like 8-9 psi to really get it to swing open then it's fine. You can try putting as much as 20 psi into the wastegate actuators to see if it opens smoothly and doesn't make weird noises/rattles.

If none of those things are conclusive try removing the intake piping enough to look at both turbo inlets. Or the turbo outlets in the exhaust if you prefer removing the down pipe and turbo outlets. Make sure nothing is damaged, no shaft play, etc.

If none of that figures it out then I dunno. Post back and I can noodle on this more.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've searched fairly extensively among Japanese websites but found nothing really like those skirts in your photo. The closest I got was Origin Labo side skirts however they look more 'complete' in that they have a finishing piece or tab at the rear of the skirt so it blends into the bodywork, unlike the one in your pic. For that reason I'd say the skirts in your pic could be adapted from another car and they didn't include that tab piece, or those skirts aren't copied from an existing skirt but an original design. Sorry I can't help out in regard to ID'ing/sourcing them
    • Wonder if JB Weld sponsored the event lol
    • There's a big difference between a car built with millions of dollars in R&D, and someone like yourself taking a normal sporty road car, and making it 5 times more powerful. At the same time, get a modern sports car, and you can turn them up towards the 1000hp mark a lot easier too. Also, give that Lambo another 20 odd runs, and chances are it too may break something.
    • There isn’t really a cheap upgrade here. If someone made a decent, bolt in 6 speed that holds some grunt, it would do very well. The 5 speeds suck. You can put a - OSG 5 speed gear set into it. Ratios are tall so it zaps the “zing” out of it. Had one, busted it. - PPG 5 speed gear set synchro or dog’s. Ratios are even taller. - An overpriced Getrag. Nice to drive, expensive to source now. - A sequential of some sort. Expensive, very expensive. How many times do you pop a 5 speed before you throw the toys out of the cot?  
    • Yes, fair call. I don't have any special love for super/hyper cars but it was impressive to watch the Lambo line up against successive skylines without any problem at all. 
×
×
  • Create New...