Jump to content
SAU Community

Recommended Posts

It was pouring rain Friday night, and my windshield started fogging up. Went to turn on the defogger and to my surprise, my climate control doesn't turn on. The recirc and defogger light strangely stay lit though. I'm presuming it's dead, but has anyone had this before and resolved it?

Looking this up online, I found a few mentions of bad solders on the connector between the two PCB's or the connector itself being dirty. I resoldered the connector on both ends and cleaned it but it's still not powering up. No other dry solders that I could see or any components that were toast. I found a few used ones at ridiculous prices (600-800$ CAD). A new one is 790$ shipped to my door. So as mentioned, before I order a new one, has anyone seen this and fixed it? 

image.thumb.jpeg.61b4eb3a375d713344807cb86ee09134.jpeg

11 minutes ago, GTSBoy said:

See if you can power it up on the bench.

Already done, along with confirming all the wiring to the unit checks out. It's more of a wild goose chase in hopes that someone else found a failed solder, bad component, etc. within the unit itself.

I have a feeling I'll have to just order a new one. 

Edited by TurboTapin
1 hour ago, soviet_merlin said:

How come you can get this in new? Is it part of the heritage program? Personally for a hundred dollars difference I wouldn't gamble on another used one.

It's just a regular Nissan part you can get from your dealer or online. Part# 28525-05U12. I just went and ordered one as I don't see any other option. Cheers. 

Edited by TurboTapin
  • Thanks 1

Just for a good chuckle. I received the new climate control yesterday and just before starting to remove my old one, I decided to try it again... it worked and has worked since haha. I'm keeping the new one on the shelf as I know it will repeat itself again at some point. 

  • Like 1
  • Haha 2
7 hours ago, TurboTapin said:

Just for a good chuckle. I received the new climate control yesterday and just before starting to remove my old one, I decided to try it again... it worked and has worked since haha. I'm keeping the new one on the shelf as I know it will repeat itself again at some point. 

I’ve seen a video on you tube where the issue is just dry solder joints and once you fix them the unit lasts forever 

12 hours ago, r32-25t said:

I’ve seen a video on you tube where the issue is just dry solder joints and once you fix them the unit lasts forever 

Yes, I mentioned it in my first that I did everything that is mentioned online (Redo dry solders, clean connector between PCB's, etc.) and unfortunately it didn't solve it. 

It crapped out again earlier today, so I replaced it. I'll keep the old one around to repair it at some point. 

3 hours ago, r32-25t said:

Ah damn. I might grab one myself because mine works most of the time lol 

It was cheaper at Trust Kikaku then it was at the dealer with my 15% off. No clue how, but I won't argue. Here's the link if ever you need one. Cheers. 

Nissan A/C Climate Control Unit - BNR32 #663111124 – Trust Kikaku (trust-kikaku.myshopify.com)

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...