Jump to content
SAU Community

Auto Electrician Workshop Recommendation for Reverse Camera Not Working CKV36 (SYD or WOL)


Recommended Posts

Can anyone recommend a workshop that can repair a reverse camera issue for a CKV36? Started off intermittent but now never works - just shows a black screen with the steering lines when you put it into reverse. For any other purpose, the display otherwise works fine. Would prefer Wollongong area but will travel to Sydney to get it fixed. Dropped by a couple of local auto electricians and they did not know where to start with it (I suppose I prefer this honesty up front rather than spending chargeable hours and not getting anywhere!) Thanks.

On 9/2/2024 at 8:11 PM, JoVo said:

Can anyone recommend a workshop that can repair a reverse camera issue for a CKV36? Started off intermittent but now never works - just shows a black screen with the steering lines when you put it into reverse. For any other purpose, the display otherwise works fine. Would prefer Wollongong area but will travel to Sydney to get it fixed. Dropped by a couple of local auto electricians and they did not know where to start with it (I suppose I prefer this honesty up front rather than spending chargeable hours and not getting anywhere!) Thanks.

Tunehoouse have sounded knowledgeable for our cars when I have spoken to them. I would hope the electricians you took it to at least first checked that the camera was getting power, the impedance across the unit was not 0, and there was continuity between the camera plug and the screen (much more specific technically).

If you have access to a wrecker for these cars, might be cheap to get a camera from a wreck and plug it in to see if an image displays. Of course , the wreaked camera may also be broken. 

  • Like 1
  • 2 weeks later...

yep it will be like that. Where do you mean by "down here"? This forum traditionally was an Australian/NZ one but we've been worldwide for many years now. So 100% state your location first so people can help by providing more localised informations (state your country, it helps a lot).

On 9/2/2024 at 8:11 PM, JoVo said:

Can anyone recommend a workshop that can repair a reverse camera issue for a CKV36? Started off intermittent but now never works - just shows a black screen with the steering lines when you put it into reverse. For any other purpose, the display otherwise works fine. Would prefer Wollongong area but will travel to Sydney to get it fixed. Dropped by a couple of local auto electricians and they did not know where to start with it (I suppose I prefer this honesty up front rather than spending chargeable hours and not getting anywhere!) Thanks.

 

7 hours ago, niZmO_Man said:

yep it will be like that. Where do you mean by "down here"? This forum traditionally was an Australian/NZ one but we've been worldwide for many years now. So 100% state your location first so people can help by providing more localised informations (state your country, it helps a lot).

He said in the OP Wollongong area.

  • 1 month later...

Update: Tunehouse looked into the problem and identified a wiring issue between the camera unit and the connector. They managed to get it working , but did warn me at some point it will stop working again. From their perspective it is unserviceable and will need replacement.

They did some research and found that the new replacement camera would be Approx $1400 supply only (their fitting cost would be $190) . They did provide the part number (28442-JL05B) and a quick google of the part number shows that these are rather expensive brand new (seemingly no longer in manufacture) for the places that still have them in stock, with the used option potentially presenting  the same issue down the track at some unknown point. They are happy for me to supply the part so that they can fit it. Decisions, decisions...

I can definitely recommend Tunehouse (thankyou Vee37!). Cost for the diagnosis was as quoted  ($190) , car was ready on time and communication was top notch. Their workshop is super clean and modern, and there was plenty of car candy parked out the front on the day I went.   Would definitely go back. 

 

It can't be some stupidly proprietary video signal coming out of it that only Nissan's can understand. Surely you can just find some generic camera to stuff in there and use hot melt glue/blu-tac/gaffer tape to hold it in place if need be?

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...