Jump to content
SAU Community

Recommended Posts

I'm getting some brown sludge in my radiator and coolant reservoir. The engine was rebuilt by the previous owner with forged pistons and rods, and new turbos, etc. I'm suspecting the oil is mixing with the coolant because of the stock oil cooler thing. I read that some of the gaskets can fail and cause the oil and coolant to mix. How do I test if this is the problem? 

17 minutes ago, kevboost7 said:

I read that some of the gaskets can fail and cause the oil and coolant to mix. How do I test if this is the problem? 

It's not a gasket failure. AFIAK, there are no gaskets separating the two fluids. If it lets one into the other, it is broken metal.

  • Like 1

Also, it's highly unlikely to be the cause, especially if there is no milkshake under your oil cap.

Goop in the cooling system is almost always rust from the block due to someone along the way not running enough coolant/rust inhibitor. If it worries you, you can try and flush everything out for a few times.

Auto or manual car, there are multiple places for oil and water to mix

I have never heard of one of those warmer/cooler thingos failing before , is that a thing?

7 minutes ago, The Bogan said:

I have never heard of one of those warmer/cooler thingos failing before , is that a thing?

Yeah. Particularly on cars where the maintenance, particularly the coolant maintenance, has not been up to scratch. Coolant turns acidic, eats the HX out, and at some point it becomes too thin to resist the pressure and you get horrible things happen. RBs are moderately famous for it. It's not like it's a problem that happens to all of them. But there've been enough events that people fear it.

  • Thanks 1
16 minutes ago, GTSBoy said:

Yeah. Particularly on cars where the maintenance, particularly the coolant maintenance, has not been up to scratch. Coolant turns acidic, eats the HX out, and at some point it becomes too thin to resist the pressure and you get horrible things happen. RBs are moderately famous for it. It's not like it's a problem that happens to all of them. But there've been enough events that people fear it.

Fair enough

OP: If the car is a auto what's the trans fluid look like because the trans cooler in the radiator may have a issue

If there's any milk shake on the trans dip stick you need to get that sorted pronto before the auto eats itself 

 

The car is a manual. The fuild in there has been replaced too.

There was actually milkshake under the radiator cap. In fact, the whole coolant was brown milkshake last year. I drained all the brown liquid out via radiator. Replaced the OEM radiator with a Koyo and Replaced all the coolant hoses under the plenum. I re-filled with fresh green coolant, and now i see brown spots contaminating the coolant again. Its not completely taking over like before though. 

I really hope its just left over rust not flushed out properly. 

1 hour ago, kevboost7 said:

The car is a manual. The fuild in there has been replaced too.

There was actually milkshake under the radiator cap. In fact, the whole coolant was brown milkshake last year. I drained all the brown liquid out via radiator. Replaced the OEM radiator with a Koyo and Replaced all the coolant hoses under the plenum. I re-filled with fresh green coolant, and now i see brown spots contaminating the coolant again. Its not completely taking over like before though. 

I really hope its just left over rust not flushed out properly. 

Send your oil out for analysis for peace of mind. 

If you have an active leak it would be badly contaminated again by now....I'm pretty sure it is just residual.

BTW I suggested checking under the oil cap, not radiator cap.

Finally, cooling system pressure testers are cheap to buy, that will tell you with a reasonable degree of confidence if there is a leak anywhere in that system.

  • 1 month later...
On 10/23/2024 at 5:32 PM, Duncan said:

If you have an active leak it would be badly contaminated again by now....I'm pretty sure it is just residual.

BTW I suggested checking under the oil cap, not radiator cap.

Finally, cooling system pressure testers are cheap to buy, that will tell you with a reasonable degree of confidence if there is a leak anywhere in that system.

If i used a cooling system pressure tester, would it show me a leak with the head gasket? Ive used one before to chase down a leaking coolant hose. Not sure if this will work on the oil-cooler warmer. 

yeah a coolant pressure test will tell you if you have a leak anywhere as it just pressurises the system. If it drops from where you set it, say 1 bar, you have a leak somewhere

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...