Jump to content
SAU Community

Recommended Posts

So my exhaust is loud and sounds awesome (good thing) but also is very loud when coming and going, dont want to piss off the neighours etc

Are the varex adjustable mufflers any good? I contacted them but they dont make r33 specific exhausts

Ive also see the adjustable inlets on this site but apparently they might restrict airflow too much which wouldnt be good for the engine.

Would prefer something thats adjustable from in cabin so i can change it on the fly, dont really want to put in one of those permanent exhaust tip things. 

Any other recommendations would be appreciated!

Link to comment
https://www.sau.com.au/forums/topic/486163-exhaust-silencersvarex-exhausts/
Share on other sites

I had a generic 4" Varex rear box on my old V8, worked a treat for sneaking home late at night, it was as quite as stock when closed

The car was "fairly" loud when open as it consisted of 1" 7/8 headers to 3" catted Y pipe, to 4" single, it did have a resonator in the mid pipe and only the Varex out the back

I also hard wired in a Varex dash mount switch, as the key fob thing is a pain to use when driving

I wouldn't recommend giving the beans when it is closed though as it creates a large restriction in the exhaust 

It also can in very handy when pulled over for "random" breath tests or just cruising past the constabulary 

 

10 minutes ago, The Bogan said:

It also can in very handy when pulled over for "random" breath tests or just cruising past the constabulary 

Coming home late at night and driving past the police is the only reason i need one haha

And yeh, definitley needs a switch to quickly enable it, dont have time to be getting my phone, opening an app, waiting for it to update etc before being able to make the change

Plenty of modern cars run things like Varex exhausts, from HSV through to Ferrari.

Their systems are usually setup so once you meet a certain condition (RPM seems to be the main kickover on the HSV from my experience) they automatically open.

You could do the same some aftermarket ECU, IE, above X throttle, and X rpm, open the valve, otherwise shut, and then also have a switch to override it when you want a nice exhaust.

On my boss' HSV Senator, I pulled the fuse on the variable exhaust, and that fails it into the permanently open position. He loved it, and was the exact amount of idle noise etc that he wanted from it, but didn't want to buy an exhaust for it incase it was droney or shit sounding.

  • Like 1
8 minutes ago, Milkmun said:

Great for flying under the radar, but will not sound as good when open compared to an actual exhaust.

This is my main problem i suppose, u just cant beat the note of the rb26, and i dont really want to lose that. 

Are there any other options besides the varex exhausts then?

On 11/03/2025 at 9:54 PM, PotatoCake said:

This is my main problem i suppose, u just cant beat the note of the rb26, and i dont really want to lose that. 

Are there any other options besides the varex exhausts then?

Aes valve sort of but not really, will practically turn it into a straight pipe. So if you already had a well muffled exhaust system but the want more noise, you open the valve. Sometimes precat, sometimes postcat.

8 hours ago, PotatoCake said:

Not a chance lol

It can get a bit droney in the fwy, which is another reason i would be looking to make it a bit quieter 

As stated above, if you don't have anything in the mid pipe look at putting a resonator in the mid pipe to reduce drone, the biggest and longest that will fit clearance wise

26 minutes ago, PotatoCake said:

Its got hpi dumps/racepace 4" y pipe & hi flow cat, not sure which brand the exhaust is, ill attach some pics

474931622_1792742761523466_923587815899696431_n.jpg

475764195_1192126825965277_983151500158406293_n.jpg

476900455_1162446898856472_1354450278312927676_n.jpg

476903542_1860276411393865_2038433951209614546_n.jpg

If you like how loud the car is now a resonator behind that mid muffler should help with drone and not effect the volume much

I've added resonators to a few aftermarket exhausts before specifically to reduce drone, volume really never changed, but cabin noise hwy cruising was much improved......with great success 

08c741c0-dde1-4946-b9f0-51f0d30d2b70_text.thumb.gif.46b8ccedea95ddaf72b613b553583878.gif

 

  • Like 1
  • Haha 1
4 hours ago, The Bogan said:

I've added resonators to a few aftermarket exhausts before specifically to reduce drone, volume really never changed, but cabin noise hwy cruising was much improved......with great success 

Yeh nice, if your in melbourne could you recommend any exhaust shops in the east that do a good job?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...