Jump to content
SAU Community

Recommended Posts

ok. i know absolutely NOTHING about importing, all I know is that I want to import. sooo, if someone wants to give me advise I would be very thankfull. :headspin:

anyway, for starters, I go to Japan from time to time, am I able to buy a car there then ship it back to aus? It sounds too simple, and I doubt its this easy right?

I think I have to find some import dealer or something right? Anyway, where do i start? How do I find everything? I know how to find the car, thats the easy part. Where do i go from there?

Sorry for any extreme newby inconveniences I have probly caused. :Bang:

:ghost: :):)

Link to comment
https://www.sau.com.au/forums/topic/49027-where-do-i-start/
Share on other sites

Well you can do it a few different ways.

You can technically just go to Japan and buy a car and have it shipped. When it gets here you will need to clear it through customs and pay duty etc on it. This is probably the worst way to do it however as you probably wont get such a great deal on the car, and you will have difficulty getting the paperwork done and getting the car on the boat yourself.

The other way is to use an import broker, they deal with finding the car for you while you stay home. They speak with buyers who attend the auctions and bid on behalf of their customers. They can also source a few cars from various wholesale yards they have dealings with.

Probably the most talked about import brokers on this forum are Prestige Motorsport and J-Spec. I'm not endorsing them although many do.

Another way to do it is to cut out the import broker and talk to the buyers in Japan yourself, some of them speak english and specifically deal with overseas customers all the time. You can save the import broker fee this way. The problem with this is that you dont reach as many buyers as you would if you used an import broker. You may take longer to find a car.

Since you're such newbie at this i suggest you do a load more research on it, read the FAQ's and such on the J-Spec and Prestige websites. There is no hard answer on which way you should go when importing a car. It's kind of a personal decision where you weigh the risks and costs against the benefits of each method.

http://www.prestigemotorsports.com.au/

http://www.j-spec.com.au/

Link to comment
https://www.sau.com.au/forums/topic/49027-where-do-i-start/#findComment-982378
Share on other sites

thanks a lot for the advice :P

getting a good deal on the car however is no problem. My gf is Japanese and her father works for Mitsubishi and knows a few people in the car selling business

however, if that doesnt work out Ill use one of the importers.

just wondering, how much does shipping cost? and how could i set that up?

dont worry, Im not taking your advice lightly, I appreciate it a lot, Im just searching through all the options.

im trying to research all the fields.

also, how do i find out BEFORE i buy the car if i can bring it back?? Im thinking either Evo V or MR2........ if I wanna skyline Ill probly just buy it here.

Link to comment
https://www.sau.com.au/forums/topic/49027-where-do-i-start/#findComment-982876
Share on other sites

You need an import license as well before the car lands in Australia. Importing a car without that bit of paperwork is against the law. It costs very little but is a key step.

Depending on the cars age you also may not be able to import that model. Over 15 years old should be fine but 14 years and younger cars will need to be on the approved for import list under the SEVS scheme. See the DOTARS site for a list.

Shipping costs roughly $65 USD per cubic meter. So about $650USD for a R32 plus insurance which can vary in cost.

Link to comment
https://www.sau.com.au/forums/topic/49027-where-do-i-start/#findComment-983006
Share on other sites

hey thanks guys  :P  

this is still pretty confusing :headshot:

cant seem to find evo  v or mr2 on the list at all :throwup:

yep, a lot of cars are either not eligible now or have not yet been applied for by a workshop. I'd really suggest talking to one of the brokers, the fee is generally only $1100 which is great value for the work they do.

If you are buying a car that is 15 years old thats a different matter...as long as its already 15 you can bring in any sort of car you like.

And there is another option called "Personal Import" if you are going to be there for more than 12 months, once again the details are on the DOTARS site

Link to comment
https://www.sau.com.au/forums/topic/49027-where-do-i-start/#findComment-983212
Share on other sites

I wouldn't worry about it to be honest right now.. if you're going to live there for a couple of years, the rules would have changed so much by the time you come back, its little irrelevent asking now isn't it? Might not even be able to do it in 2 years who knows...

Link to comment
https://www.sau.com.au/forums/topic/49027-where-do-i-start/#findComment-984545
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...