Jump to content
SAU Community

Recommended Posts

  • Replies 223
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Out of interest Leewah what power were you making before nitrous

Before the NOS was installed, I was making 380rwkw on 18psi and 98octane fuel. This was measured on a DD dyno.

After that,we upped the boost and whacked in a substantial (but not huge) shot of NOS.

Video of "I WIN"  Courtesy of Neil from Team Krazy...

 

http://www.teamkrazy.com/australia/gallery.../video/iwin.zip

 

8.9mg

Nice clip!!! Very impressed in the run. Pity bout the Blair Witch styled handling of the camera though :rofl:

thought I'd post up my last graph for everyone to pick at :D, it's not in shootout mode or anything, on a Dyno Dynamics machine in 4th gear an pump fuel. people tell me its "peaky"....wouldn't really know personally, i just enjoy driving it an putting the LOCAL AUSSIE cars to shame :)

Car has: (power relevant)

Blitz s/s mesh pod filter

HKS front mount

hi-flow turbo

bosch internal fuel pump

malpassi adj. rising rate fuel reg (black one)

stock injectors

running 18psi boost

LT-12 Microtec ECU

HKS dump pipe,3"Blitz front pipe, 3" hi flow cat, 3" kakimoto cat back

248rwkw @ 6100rpm

an dont ask about 1/4 time caus it aint been run yet, plus the tein HA coilovers wont help, but come warmer wether an i'll try all the same :)

:cheers:

  • 6 months later...

i think its time to revive this because people have new cars and new mods and hopefully the bad feelings from earlier in this thread will be long forgotton....

ive since sold my r32 gtst and have built a sr20det sileighty with mild mods but i have a 10 second t88 34d sr22det silvia on its way from japan so hopefully if everything is all good ill be throwing a graph up here to get things movin again after it lands here..... :D

so what have we all done to our cars since we last spoke??

thought I'd post up my last graph for everyone to pick at :), it's not in shootout mode or anything, on a Dyno Dynamics machine in 4th gear an pump fuel. people tell me its "peaky"....wouldn't really know personally, i just enjoy driving it an putting the LOCAL AUSSIE cars to shame ;)

Car has: (power relevant)

Blitz s/s mesh pod filter

HKS front mount

hi-flow turbo

bosch internal fuel pump

malpassi adj. rising rate fuel reg (black one)

stock injectors

running 18psi boost

LT-12 Microtec ECU

HKS dump pipe,3"Blitz front pipe, 3" hi flow cat, 3" kakimoto cat back

248rwkw @ 6100rpm

an dont ask about 1/4 time caus it aint been run yet, plus the tein HA coilovers wont help, but come warmer wether an i'll try all the same :(

:)

An observation, it has the usual RB25DET power dip (flattening) around 4,500 rpm to 5,000 rpm. This is sometimes tricky to tune out, but it is worthwhile as it is a common use rpm range and it is important in average power calcs. Some tuners spend all of their time searching for 1 or 2 extra kw of max power (at 6,000+ rpm) and don't worry so much about this important rpm range.

Standard ECU's have a problem in this area but the Microtech should be easily able to be tuned around it. So I would strongly suggest you pay your tuner a visit and discus the "power dip" with him, and seek out ways that you can tune it out. You will be surprised at how much differecne it makes.

:)

r33 gtr

my last tune at the end of jan this year

mods

Garret 320hp turbos ball bearing

APEXI PFC and AVCR

SARD 700cc injectors

TOMEI 260deg 9.15mm poncams

z32 afms

custom exhaust and inlet

the rest is std

the run was at 20psi on ultimate 98 on a hot day at Hyperdrive

In the future (hopefully in the next year)

i got stainless steel manifolds to be fittted (std position)

cold air take enclosure to be finished off

oil cooler kit

custom sump

intercooler upgrade

I just hope this thread stays on topic this time :)

Good result. Peter.  Do you have the boost and A/F ratio curves as well?:(

yes i do but not on the computer ,a/f is very stable just under 12:1/11.9:1 and the boost is a little wavey as i did most of the tune on 18psi and just turn it up to 20psi for the last run before lumpy had to go (we didnt have much time to set new afms) so i had a direct comparson to my last run on the Adrenline dyno (525.4rwhp at 20psi) but when i adjusted the AVCR i got the duty cycle a little off which coursed the waves in boost and are identical to the wave in the hp line (it was only about 1psi or less boost wave ~19.4 to20.2 from memory). So to have it go with only a couple hp on two different shootout dynos was very pleasing :wassup:

Looking forward to Drag Combat at the motorplex

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...