Jump to content
SAU Community

Recommended Posts

the VL box is not.

it has a rougher shift and less syncjro's or something to that description.

coming from the VL "area" of the world, i've seen many a blown manual MX-7

the RB25 is MUCH tougher

the vl n/a box is similar the rb20 box

the vl turbo box is similar to the rb25 box

from what i've seen the only major differances are that the rb20 and rb25 boxes have double synchros on some gears whereas both vl boxes are all single synchro.

plenty of poeple have put lots of power through a vl turbo box without a problem, and the only way i've heard of them breaking is when boosting hard with a modified motor in 5th gear.

i doubt the RB25 box is 'MUCH' tougher, but i'd get one of those if i could purely because its newer and with the double synchros it should be a smoother box.

from what i've seen the only major differances are that the rb20 and rb25 boxes have double synchros on some gears whereas both vl boxes are all single synchro.

The R33 box has double synchros in the first/second gears.

The tolarances in the box are alot tighter than in the MX7 box.

Why dont we use the VLT box in our cars instead of the double priced rb25det box ?

the MX-7 is the Turbo box, you wont find them cheap.

The "half priced" one is a stock N/A box, which is still over priced for box only.

The R33 G/boxes are the toughest. No denying that at all as can be seen from the majority of posts.

like i said, i've seen MX-7's blown, but nowhere near as many RB25 boxes.

Could be due to a lot of things, age being one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...