Jump to content
SAU Community

Recommended Posts

eh? I thought you could drive an unregistered car if it was for the express purpose of getting it registered?

sorry, I couldn't find it on the RTA website but it was my understanding. check it out....

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

does that mean i can bring the car to a compliance standard myself, and then once completed take/tow the car to a RAWS workshop to have a certificarte filled out?

another thing- why does bringing a car to compliance cost so much, as in whats included in the 1-5k or more that it costs.  I can factor in the cost or tyres and even if i paid a mechanic to bring a car back to stock surely it wouldn't cost that much in labor?

You can't do sevs compliance yourself, that's the whole point of RAWS/SEVS - only RAWs that have SEVS plates can do the work. if you are talking about a 15yo car, then you don't need a RAW at all. You can do it yourself, or have any workshop who knows what they're doing perform the work, then have (in NSW) and RTA approved "signatory" sign off on the car as meeting the relevant ADRs. SEVS compliance costs so much because there are a lot of costs in becoming a RAW and getting approved under SEVS, on top of what the actual compliance work 'costs'.

Richard

  • 2 weeks later...

my understanding of it from there is once the car has passed compliance, it then get's rego

i don't think there is much in between, however i could be wrong, check out http://www.prestigemotorsport.com.au and click on the import flowchart in the top right corner that will give you some more info.

i keep hearing stuff about the 15yr rule going out.. When is this supposed to happen?? What are the chances of me being able to import under the 15yr rule december '05 or january '06... If the 15yr rule becomes abolished, how do we import? will we be forced to go under the SEVS scheme?

:P

the 15 year rule is definitely being amended, not abolished, you may find stricter regulations on what qualifies as a 15 year old import. This will happen around Jan 2005. The SEVS scheme isn't that bad.

I wouldn't fancy your chances of you being able to import any of the current popular imports under the 15 year rule come dec 05 or jan 06.

We were contacted by DOTARs and adviced to stop buying any more 1990 as we may find it difficult to get import approval come January. We're still waiting for it in writing.

See before they made it 15 years old to the month, it was 15 to the year, but when they changed the rule, a lot of people had bought the car before the law changed, so they were allowed to bbring their cars in under the old system. By law they have to do it again for all the guys who have already bought 1990 cars, but they adviced us that from now on if anyone purchases a 1990 car assuming that they will allow it, they won't make an exception.

That's all the info that they've given us. They're restructuring the management of DOTARs, so everything's up in the air. I guess they're just covering their arses in case they do change something.

well funky said it was being ammended, not abolished :) so it will probably still be there, it really depends on what the changes in regulations exactly are.

If they get stricter on modifications, or require other criteria to be met, it could turn out it would be better off importing a newer car under SEVS anyhow.

With a new Liberal senate majority, I think this current government will feel a bit more obliged to make more sweeping changes without opposition. Australia's fault for voting so one sided at the election...grumble.

Actually i am offtopic :D :spamcan:

separate question, im in Victoria.

Can I get temporary registration and drive the car to the compliance workshop to get complied?? (15 year old import)

Someone mentioned in a previous post "DONT DRIVE IT"

but isn't the purpose of a temp reg to do the repairs / work you need to get done to get it rego'd? So wouldn't compliance mods qualify for that?

You can get an unregistered vehicle permit (UVP) from Vicroads, costs $67 for a 28 day permit (there's also a 1 week one for about $40, I think). If you have access to a fax machine and a credit card you can do it over the phone.

I drove my car from the docks to Ferntree Gully using a UVP and had no problems at all, but I took it real easy and my wife followed all the way in her car - you definately don't want to attract any 'unwanted' attention. I've also driven the car from home to the compliance place which is not far from me.

I think others have suggested not driving it because there's a potential for something to go wrong with the car, esp since it may have been in storage for a long time and there might be deterioration (eg loss of oil/coolant, etc). It's a risk, no doubt, but my car is pretty standard so I decided to take the risk...plus it would have cost more to have it trucked everywhere. On top of that I've seen the damage that can be done by a careless tow truck driver....

separate question,  im in Victoria.

Can I get temporary registration and drive the car to the compliance workshop to get complied?? (15 year old import)

Someone mentioned in a previous post "DONT DRIVE IT"

but isn't the purpose of a temp reg to do the repairs / work you need to get done to get it rego'd?  So wouldn't compliance mods qualify for that?

if you bring in a sev's vehicle, only the compliancer is theoretically ever allowed to touch the car till the compliance is completed.

On a 15 year old any monkey can do anything with it, which is wierd. For the cars that we collect from the docks for our clients, we take a trade plate down and drive it to the compliance centre with it on. If the client wants to pick up the car themselves, then we get em to get a 24 hour to a weekly permit from vicroads, costs are fro $37 for a day to $50 something for a week, so most people take the weekly one.

Once you've got to the vehicle comes your fist challenge, starting it. 9/10 times you'll need a jumper pack or jumper leads and a mate's car.

Then comes challenge 2, fuel. Because of the lack of the filler neck you have to hold the fuel nozzle at half throttle and let if fill up... and it takes forever :cheers: Make sure you put some 98 RON fuel in there as most cars that come out of japan have a 95 RON requirement (hi-po cars requiring more) and regular fuel is about 92 RON.

Also note that travel in the citylink "should" be free ;p

Because its a 15 year old vehicle you're free to do what you want with it once you pick it up. There's no limit on the time you have to compliance it (in VIC anyways), you can put it in your backyard for a year if you want. But it'll cost you a small fortune in UVP's :)

Once you've got to the vehicle comes your fist challenge, starting it. 9/10 times you'll need a jumper pack or jumper leads and a mate's car.

I picked up my GTR from the Patricks terminal at Webb Dock (Vic) and there was no way they were going to let me take my car into the Dock area to work on the GTR....fortunately I had a spare battery but I had to carry it to the GTR to get it started

you would think that there would be a jumper pack at the wharves... i mean how many cars would they unload a day? And if like funky says that you need to jump start 9/10 times... it would just be more convienient for everybody.

It's quite possible they do, but I was on a tight time schedule and figured by the time I ran around trying to find someone to help, it'd be quicker to just grab my own battery.

  • 2 months later...

Sorry noob here can someone explain to me:

The 15 year rule? I assume this means it is easier to import cars 15 years old or older from Japan (so 1990 cars for 2005).

What is SEVS?

How does the personal ownership laws work? I live in Japan so this is an option for me.

Thanks in advance.

Sorry noob here can someone explain to me:

The 15 year rule?  I assume this means it is easier to import cars 15 years old or older from Japan (so 1990 cars for 2005).

What is SEVS?

How does the personal ownership laws work?  I live in Japan so this is an option for me.

Thanks in advance.

http://www.dotars.gov.au/transreg/vsb/vsb_10.htm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...