Jump to content
SAU Community

Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

I think I converted my Dad and my younger brother when I got mine. They were trying to convince me to get a HSV or something, when I turned up with the 33 I got the funny looks and "it's nice, but it's not a real car". They lined up against me in a trimatic 253 HX Premier (which sounded nice but its ¼ mile times could have been measured with a sundial), I gave it a bit, just enough for the turbo to start spooling and to keep me *just* in front of them, short shifting nice and early. I waited until we got to about 60, then pinned it in second and left them standing. Hahahaha the look on their faces was priceless :mad: These days their opinions on cars are much more varied, with my brother now building a VH SLE running a 1uzfe and a couple of turbos. Should be a weapon once it's done.

But yeah, I had some bloke at the BWCP lean out of a passenger window and say "if it had another four cylinders you might be worthy of a race". I replied "it's a six, f*ckwit", and he just said "oh well, it's still a heap of shit". To that gem I replied "not everyone can afford a f*cked up, rusty old piece of crap like yours". They didn't like that, so they did a burnout to prove their manhood, oblivious to the marked police car two cars behind them. Oh how we laughed.

Link to comment
https://www.sau.com.au/forums/topic/50592-get-a-v8/page/3/#findComment-1006802
Share on other sites

considering the HSV VX GTS is only a tad slower than the R34 GTR, they aint all that bad. the HSV is cheaper (well was), a family car, only rwd, heavier and doesnt look too bad. but it does chew fuel...

commo's n skylines are everywhere...so you cont compare that, but some bogans have to make smart-ass comments then be blown away...when will they learn

Link to comment
https://www.sau.com.au/forums/topic/50592-get-a-v8/page/3/#findComment-1006809
Share on other sites

It comes down to turbo's are a more fun.

The torque transition is what makes it fun.

Nothing then there's everything, this snaps the back wheels in to a spin.

Then there's theu torque wave when pulling out of corners with light throttle.

I've owned V8's in the past and the power delivery of the turbo is much much more entertaining. Also why it makes it so much more dangerous in the wet. :(

I hate driving NA's now. :mad:

Link to comment
https://www.sau.com.au/forums/topic/50592-get-a-v8/page/3/#findComment-1007158
Share on other sites

It comes down to turbo's are a more fun.

 

The torque transition is what makes it fun.

Nothing then there's everything, this snaps the back wheels in to a spin.

 

Then there's theu torque wave when pulling out of corners with light throttle.

 

I've owned V8's in the past and the power delivery of the turbo is much much more entertaining. Also why it makes it so much more dangerous in the wet. :(

 

I hate driving NA's now. :mad:

Yeah and i think the V8 rumble doesnt beat the sound of the blow off valve, it sounds alot better and you can't beat the feeling of the suction in your seat when you give it a bit, so they're heaps of fun compared to V8's

Link to comment
https://www.sau.com.au/forums/topic/50592-get-a-v8/page/3/#findComment-1007198
Share on other sites

I like the sound of the BOV when its leaking on part throttle and the suck whoosh sound of the turbo but one thing I don't like.

Is the hard PSHHHHT sound when driving a little hard between gears.

Gets a little annoying. I much prefer the sound of a nice V8 (LS1's don't sound nice). The New BA Ford V8's sound damn nice.

Link to comment
https://www.sau.com.au/forums/topic/50592-get-a-v8/page/3/#findComment-1007218
Share on other sites

I *love* the sound of a tough V8! Especially blown, and *especially* with a couple of massive turbos! If money was no object, a TTV8 would right up there on my list of things to get.

But yeah, chatting to a guy at the Brisbane Motor Show who was one of the Ford engineers on the XR6T design team, he said something about turbo lag, I said to him "I quite like it, without that, there's no rush of torque is there?". Got him thinking anyway. So a win :D

Even these days I enjoy it, I take off easy and hold about half throttle in first, then at around 3-3.5k the turbo spins up to 7psi, the tyres scrabble for grip and we're away :) And hills are good too, as the engine loads up the turbo spools and it holds its speed with little or no extra throttle. Magic.

One thing I've noticed in mainstream car mags though is that they rag on a car if it has any noticeable turbo lag whatsoever, like it's a bad thing. No, what they're experiencing is what the engine is like unassisted, then the rush as the turbo comes on song. A turbo engine is a different beast to a NA motor, criticising it for feeling different despite being superior in most ways seems a little short-sighted to me. Maybe the writers that complain about lag don't have the skill to adjust their driving to suit the car?

Link to comment
https://www.sau.com.au/forums/topic/50592-get-a-v8/page/3/#findComment-1007278
Share on other sites

And hills are good too, as the engine loads up the turbo spools and it holds its speed with little or no extra throttle. Magic.

My god, finally someone else who finds that fascinating!

I often drive the car and hold throttle and go "look erin, look! the engine rpm stays the same, the throttle is the same, but watch the boost! *boost comes up to a positive pressure*"

She never seems to get quite so excited as I do :D

... that comment applies to a lot of things actually. I get entertained by stupid things. Like the design of quilts (they do squares so the feathers dont all go to one end... GENIUS!)

Link to comment
https://www.sau.com.au/forums/topic/50592-get-a-v8/page/3/#findComment-1008137
Share on other sites

The trouble with that theory is that the 34 was always meant to be a good car with a decent build quality. The HSV VX GTS is just a cheap sales rep car with some minor trimmings and a massive sales tag :D

And a V8... some pretty wheels, a body kit! DONT FORGET THAT!!!

Link to comment
https://www.sau.com.au/forums/topic/50592-get-a-v8/page/3/#findComment-1008366
Share on other sites

Some V8s sound fantastic.... Others, sound like a fat man farting on a leather couch in a concert hall.

I wonder what mine sounds like(hopefully not an obese rectum)....I've never heard it from outside the car, cause NOBODY drives my Skyline

Link to comment
https://www.sau.com.au/forums/topic/50592-get-a-v8/page/3/#findComment-1008783
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No. GKTech arms have spherical bearings in them. No bushes. You will not need bushes for those arms. The sphericals are a bit of a maintenance nightmare. I have replaced all of mine several times in the 5 or so years I've had them, and I have the arms out regularly to clean and lube the balls. Worth the pain on an R32, because the standard arm design is trash. If you need the camber adjustment, there are other options (than the GKTech ones), although I would still lean towards and prefer the GKTech ones, even with the maintenance load of the sphericals. The caster adjustment is also highly valuable, allowing for setting the car up to drive straight. There are a million options for these, including the GKTech ones. I've had Tein rods on mine for 20 years and the balls are much less trouble in that location. Never given me a moment's pain. All positives, no negatives. I consider them compulsory.
    • Lol yeah I ordered the clips mentioned and as far as the amayama diagrams go i think thats all I'll need. Fogured id ask, sometimes people's first hand experience doesnt always match up to diagrams haha, i guess I'll wing it and worse comes to worse I'll just deal with it as I go
    • Thanks for all that information I appreciate it. To answer your questions: - Yep that's what I mean. These guys are professional painters to so I must be missing something. It's a bit hard to explain. - With the primer landing on clearcoat, I make sure that the surrounding clearcoat is scuffed to 240 grit as my epoxy primer says that I only need to sand the area to 240 grit. - Yeah so similar to the first question, assuming that the paint landed on the unscuffed clearcoat because I've seen that happen. - Yep I want to prep the surface in that order. Only reason because epoxy primer will protect it from rust and I need that atm with this crappy Sydney weather. I think I was worried about time, if I try to put the filler down but screw it up somehow and I don't have time to sand it off and reapply it then need to put primer later that it might start to rust again so I wanted to apply the primer as quick as possible to not deal with rust.  - I just deleted some answers, I just realised after watching a video and what you said about looking at the data sheet, that I need to read the data sheet on the specific filler I'm using. It's possible now that I put epoxy primer first was a waste of time and need to go to bare metal lol
    • I did. I went to a suspension guy and he told me because I don't have adjustable camber arms it's the reason why my car veers towards the left if I take my hands off the wheel but if I drive my other every day car and take my hands off the steering wheel it goes completely straight. I think it's common with Skyline's. In order to fix the problem, I likely need gktech camber arms then nismo bushes since I have poly bushes atm, then a wheel alignment after that. With my car if I take my hands off the steering wheel on a really bumpy road before stopping at a light I have to hold my steering wheel somewhat tight otherwise my car will legit just go completely in the other direction quite quickly and I'll slam into something lol instead of stopping straight. I Believe this YouTuber had the same issue and fixed it with gktech arms. At timestmap 6:05 he talks about how the car doesn't veer anymore after installing these arms.  
    • hello! does anyone have a schematic that shows how to test the blower motor resistor for the vac system? i believe the part# is 27761-15U00. I think the resistor is toast, but would like to be able to test it somehow before i embark on the journey to find a new one. cheers! 27761-15U00
×
×
  • Create New...