Jump to content
SAU Community

Recommended Posts

If thats the one with 4 or 5 LEDs then its ok though for that money you could get a autometer bulb type with chips (to set what revs it goes off) and it will be bright enough to light the cabin up and let you know its time to change gears.

Just dont be a fool and set it at 3k like someone i know that has a MINES gts.:uh-huh:

Ash.

http://autometer.com

Link to comment
https://www.sau.com.au/forums/topic/5072-shift-lights/#findComment-78469
Share on other sites

The Isotta one is real nice. You need an aftermarket steering wheel though as i tgoes between the boss and steering wheel.

Personally I don't like progressive shift lights. I know when I need to shift, that is just before the red line. If i had the time to look to see what light i was up to see if i needed to shift yet, I may as well have just looked at the tacho.

How much is the pencil type shift light from autometer? And from where can I get one?

Link to comment
https://www.sau.com.au/forums/topic/5072-shift-lights/#findComment-78662
Share on other sites

same here dude... you only need one light to light up which tells you to change now!

Originally posted by NIZ30

Personally I don't like progressive shift lights. I know when I need to shift, that is just before the red line. If i had the time to look to see what light i was up to see if i needed to shift yet, I may as well have just looked at the tacho.

How much is the pencil type shift light from autometer? And from where can I get one?

Link to comment
https://www.sau.com.au/forums/topic/5072-shift-lights/#findComment-78671
Share on other sites

Noooooooooooooooo!!!! ure all wrong!!!! u need as many lights as possible!!!!! With the cig lighter ones, u need to recalibrate them when u turn things like neons on etc as they can suck voltage or current or wateva it is.

eres mine!

http://forums.skylinesaustralia.com/attach...s=&postid=73141

Link to comment
https://www.sau.com.au/forums/topic/5072-shift-lights/#findComment-78771
Share on other sites

Originally posted by GTR-80Y

Noooooooooooooooo!!!! ure all wrong!!!! u need as many lights as possible!!!!! With the cig lighter ones, u need to recalibrate them when u turn things like neons on etc as they can suck voltage or current or wateva it is.  

eres mine!  

http://forums.skylinesaustralia.com/attach...s=&postid=73141

I used 1 of those 1'c before, and will never again.

I got a Pivot Shift Light which works off the cigarette lighter aswell but much more accurately, will post pics when i get home.

Link to comment
https://www.sau.com.au/forums/topic/5072-shift-lights/#findComment-78853
Share on other sites

Originally posted by A31_Cefiro

Where did you pick up the Pivot light from?

i got mine through the melbourne Apexi dealer for a really good price coz my friend ordered a bunch of axepi stuff from him.

Same guy doesent work for apexi anymore, but u can source em out at certain Autobarns. or shops like evo-r, jetspeed

Link to comment
https://www.sau.com.au/forums/topic/5072-shift-lights/#findComment-78902
Share on other sites

Autometer all the way baybe.

BTW NIZ30 for a pencil shift light u need 2 components

"5310

RPM Activated Module

This electric module allows the RPM “Pills” to be used for triggering Shift-Lites. For 4, 6, or 8, cyl., std. electronic ignitions, 12-16 volts. 1 amp max."

5310.jpg

and the shift light itself

"5331

Quick-Lite Shift-Lite (silver)

Includes plug for easy connection to tach or 5310 module."

5330.jpg

This is what i use in my car.

Around 700$ with tacho.

Best setup u can get for a performance street car.

6858_large.jpg

Link to comment
https://www.sau.com.au/forums/topic/5072-shift-lights/#findComment-79177
Share on other sites

Thanks for that GTR King. Didn't know there were two sections to this light. Still not sure where to get one though.

As for the monster tacho.... My car has a perfectly good tacho, I can't see the point (besides wank value). Of course, if your car doesn't have one as standard, it's a must.

Link to comment
https://www.sau.com.au/forums/topic/5072-shift-lights/#findComment-79199
Share on other sites

Well to be honest i didnt buy it for the "Wank Value"

As i Drag race my car and need consistant times and for that u need the best equipment. As for buying a shift light u could order them from almost and speed shop. If u do decide to get one make sure u get the right shift light chip eg 6500 rpm as it is not variable via a dial. U need the chip to light it at the desired revs u want. As u can see buy the tacho i got it has a pencil light shift light and believe me they r bright. Also comes with a coloured cap to put over end for night use so it dont blind u. The one i have will easly light up my whole interior like a UFO. They r brilliant design. I wouldnt settle for anything else. Well thats my opinon.

Thes light are great as well but a bit bulky and dont look as neat as a pencil light. Your choice but.

5340_large.jpg

Link to comment
https://www.sau.com.au/forums/topic/5072-shift-lights/#findComment-79218
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...