Jump to content
SAU Community

FLM NONSTOP Banzai Battle CRAZY#1, Calder Park, Dec 12


Recommended Posts

Full Lock Motorsport are proud to present the first Victorian drift competition on Sunday, Dec 12th at Calder Park Raceway. This comp is open to everyone, and all entries will be raced in the same class. The winner will be showered in "glory and prizes", while the losers will be left in the gutter (hehe).

Autobarn Sunbury will be supporting the day with lots of prizes and giveaway's for the drivers and the crowd.

Competitor entry is $100 and spectators are $10 each, with kids under 12 FREE!!! Gates open 8am at Calder Park, drivers call Calder to prebook as entries are capped at 60 cars.

Interstate entries are welcome, but we recommend you pre-book.

So come down to Calder Park, Sunday Dec 12, to see Victoria's best battle for top position. More info to follow soon.

Regards,

the Full Lock team

i dount they will... they said at sandown on the maserati that u can on the training runs... but im still trying to work out if i will have enough money for it.

december definately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...