Jump to content
SAU Community

Engineering with Aftermarket ECU

vlv00m

By vlv00m,
in Engines & Forced Induction

 Share

Recommended Posts

vlv00m Apprentice

vlv00m

Posted
Posted

I'm pretty sure that you are unable to get your car engineered with an After Market ECU. (eg. Haltech, Wolf 3D, Microtech)

So how to people go about passing the engineer with the After Market ECU ?

I heard that you can get your aftermarket ECU tested for emissions, allowing you to pass it in engineering, but apparently this is very very expensive ($4,000)

I was thinking maybe to hide the After Market ECU somewhere else in the car, and go get the car engineered. Leaving the standard ECU in the foot well. And see if I get the car passed. Has anyone tried this ? did it work ?

If I can't get it passed. My Next question, do you think I will be able to start my car with the standard ECU with most of the sensors removed ?

As I'm in the process of putting a RB25 NEO into my VL, all the wiring hidden, and most of sensors will be removed, like the transaction control throttle body, boost control, knock sensor. It will still have the oil sensors, water temp, MAF sensor, OS sensor, just the bare basic's

Sorry about the long Thread, Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/51121-engineering-with-aftermarket-ecu/
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted

I don't think they have an emmissions test cell in the Act. So I suspect that all they will do for an engine swap inspection is check the numbers and make sure that nothing is stolen. Since you are putting a much "cleaner" current generation 2.5 litre engine in car that came with a 1986 "dirtier" 3 litre engine, I don't think there will be a problem.

Best answer, ask the inspectors what they will be checking.

browny Proficient

browny

Posted
Posted

Talk to a signatory or the relevant inspector that passes this sort of thing.

I have heard various theories about engineering ECU's but i'm not going to repeat any because it's all heresay and therefore may be misleading.

In any case my recommendation is that you don't play swapsies to get through engineering. Personally I can't see why anyone would ever do this. If you are going to go to the effort and cost of having something engineered, you might as well get all the mods signed off then and there so its all above board and you minimise the risk of problems later on (eg insurance or defects). Otherwise my view is that you are leaving yourself open to be liable because the car you are driving is effectively not road legal.

HKS34R Collaborator

HKS34R

Posted
Posted

I will be speaking to an engineer later this afternoon about getting my engine swap engineered and will ask him then. I have had an emissions test done on my last car before it was engineered, and the rta dude said that it would be fine once I get the car to pass the emissions test. However without the car actually passing an emissions test before I sold it, I can't confirm this.

However, would an engineer check for an aftermarket computer?? I have had my R34 fully engineered in the past and the engineer didn't even consider it!

Sydneykid Grand Master

Sydneykid

Posted
Posted
I have recieved feedback from a Engineer in NSW, saying that they wont pass a aftermarket ECU.

I will contact some Engineer's in ACT and check with them

It's going in a VL Commondoor, so the "standard" VL ECU won't work. It's an RB25DET NEO engine, they were never emmisions tested here as they weren't sold here. So what isn't an "aftermarket" ECU in this case? The VL ECU is "aftermarket" to the engine and the RB25DET ECU is "aftermarket" to the VL.

So you have to ask the question of the engineer correctly, don't ask "is an aftermarket ECU OK?" Ask "which of the two ECU's do you suggest?" Since neither will work, then he has to say aftermarket is OK as long as it passes the emmmisions test.

Whether or not it passes the emmisions test is the real question, it shouldn't matter how you get there. :D

browny Proficient

browny

Posted
Posted
It's going in a VL Commondoor, so the "standard" VL ECU won't work. It's an RB25DET NEO engine, they were never emmisions tested here as they weren't sold here. So what isn't an "aftermarket" ECU in this case? The VL ECU is "aftermarket" to the engine and the RB25DET ECU is "aftermarket" to the VL.

The ECU is considered to be part of the engine, as is the exhaust, intake tract, fuel tank and any pollution devices. So the "standard" ECU is the one that comes with the engine from the factory.

Whether or not it passes the emmisions test is the real question, it shouldn't matter how you get there.

I agree but in reality it depends on the engineer and how they interpret the ADR's. I have heard the arguement that the adjustable nature of an aftermarket ECU means some engineers will never allow one to be passed because of the way they read the rules.

INASNT Grand Master

INASNT

Posted
Posted
If he knows it's there he should be interested because the ECU impacts on emissions.

But an aftermarket ecu also tuned properly can pass emmision tests.

But i see your point as the tune can be easily altered after passing the test. So how does the engineering report cover this issue?

Sydneykid Grand Master

Sydneykid

Posted
Posted
The ECU is considered to be part of the engine, as is the exhaust, intake tract, fuel tank and any pollution devices. So the "standard" ECU is the one that comes with the engine from the factory.

I agree but in reality it depends on the engineer and how they interpret the ADR's. I have heard the arguement that the adjustable nature of an aftermarket ECU means some engineers will never allow one to be passed because of the way they read the rules.

What if the RB25DET he is using is from an auto, then he can't use the "standard ECU". VL ECU's are tunable anyway, so if he could use one of those he would be able to tune it just like any aftermarket ECU. Even LS1 ECU's are tunable these days (via LS1 EDIT) , does that mean you can't engineer a Commondoor with a standard one of those?

You are right, it unltimately depends on the engineer. But it also depends on how you approach the problem with them as well. :D

Sydneykid Grand Master

Sydneykid

Posted
Posted
But an aftermarket ecu also tuned properly can pass emmision tests.  

But i see your point as the tune can be easily altered after passing the test. So how does the engineering report cover this issue?

The engineering report is done as at the time the car was presented. It is exactly the same as turning up with standard wheels and then swapping then over later. When he checked it, it passed that's why the engineeering report is timed and dated. :D

Sydneykid Grand Master

Sydneykid

Posted
Posted
So an engineers report is basically the same as a bodgy roadworthy!! :D

Well no, it is a little more detailed and requires considerably more knowledge and testing. But what else can the poor engineer be expected to do, follow you around and make sure you don't change anything? :headspin:

browny Proficient

browny

Posted
Posted

Disclaimer: I am just arguing here because i'm an engineer and I like to argue. What i'm actually saying might be completely incorrect.

What if the RB25DET he is using is from an auto, then he can't use the "standard ECU". VL ECU's are tunable anyway, so if he could use one of those he would be able to tune it just like any aftermarket ECU. Even LS1 ECU's are tunable these days (via LS1 EDIT) , does that mean you can't engineer a Commondoor with a standard one of those?

If I was a signatory I would argue thus...

If the RB25 he is using is an auto he needs to use the auto ECU. If he wants to use a manual he needs to use a manual ECU. Otherwise he could prove the auto and manual maps are identical and use either.

I would argue that it is not only the physical box that constitutes an ECU but also the factory maps. Therefore if you change the maps from factory, you are no longer emissions compliant until you prove otherwise.

I don't know anything about modern commodores, is LS1 EDIT released, supported and endorsed by Holden?

I will contact my local engineer to get another perspective.

discopotato03 Grand Master

discopotato03

Posted
Posted

SK do they have a prob with RB30DET's not being a factory option ? Most are probably not aware if it looks factory and evaprative , breather etc ancilliaries are connected and working . I doubt many engineers would witness the computer , if you tell them its factory that's what the report will state .

Cheers A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...