Jump to content
SAU Community

Recommended Posts

its probably just your switch, take the door panel off and find the motor that drives the window panel. use a 9V battery and wire it to the two wires going into it. if you put it the right way, the window will go up, if you put it the other way the window will go down. SHould solve your problem till you replace the switch.

Link to comment
https://www.sau.com.au/forums/topic/51140-help/#findComment-1013405
Share on other sites

did u read my post in the other thread?

have a listen carefully to the motor...once an a while it will actually turn over but shit itself again. when u hear it turn over quickly push the window up from inside the door trim with ur hands or pull it up if it is sticking out of the top. thats how i did mine.

other than that do what chop's did disasemble and take the motor out and put some wood in there.

Link to comment
https://www.sau.com.au/forums/topic/51140-help/#findComment-1013408
Share on other sites

is the window fully down? my window has problems going up aswell, however it always goes down fine. With my window if i take it down say half way, and it doesn't want to go back up again, i hit the top of the window down while holding the switch and it comes back up again. If your window is fully down take off the door trim, get a thin bit of wood or something u can stick down the door onto the top of the window, hold the window switch to bring the window back up and tap down on the window. see if it works.

i can't actually hear mah motor shit itself!!!
Link to comment
https://www.sau.com.au/forums/topic/51140-help/#findComment-1013429
Share on other sites

im pretty sure its ur switch thats faulty mate.....replace the switch or do wat funkeymonkey said

what ive done before in other cars is replace the switch with the passanger side switch momentarily just to move the window up. I dont know if it will work though since the driver side console has a few buttons there and thus the passanger side switch may not fit

Link to comment
https://www.sau.com.au/forums/topic/51140-help/#findComment-1013491
Share on other sites

just remember if its done it once it'll most probably do it again. like when i went to the shops and i accidentaly pressed the switch it went down 2cm but not back up again so i had to go home:D:D theres no way im gonna leave my car with my windows slightly open in springvale:D:D

Link to comment
https://www.sau.com.au/forums/topic/51140-help/#findComment-1015070
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...