Jump to content
SAU Community

Recommended Posts

I am about to spend some hard earned on larger in jectors for my RB20DET.

At the moment they go to lunch (100%) at about 6200. This is OK as the engine doesn't hurt its self and we run it fairly conservative up top anyhow. However, we are giving the old girl her circuit race debut next month and this will mean much more WOT.

I want a drop in replacement, keeping in mind that she might be getting a 2.4 cubes to satify soon.

Thanks for your help

Link to comment
https://www.sau.com.au/forums/topic/51174-injectors-where-to-now/
Share on other sites

Depending on how much power you plan to make should be the guide, but I think that RX7 hi impedance units flow 550cc and drop straight in.

The standard plugs will also connect as long as you cut the small plastic keyway from inide the inj. socket - takes a few min with a boxcutter. :D

At least this is what I have done to my RB20 and looking for 250kW which these inj. would handle.

Thanks G,

I had heard the RX type were drop in's. I think the std ones I have are about 280, so 550 should be ample. We will run between 200 - 230rwkw I expect. Have seen 212rwkw, but thought we had better pull back a bit till we got a few things "safer"

I have no idea what the 2.4 will do, but I am mainly looking for mid-range anyhow..

Do you have a ball park on price for those injectors?

Tom

Why not go GTR injectors?My car idles and drives the same when it had the tiny RB20 ones.

http://www.skylinesaustralia.com/forums/sh...?t=34332&page=1

Tom, on reflection I think the above advice is probably best, as I have seen GTR Inj. for sale around $350 and I paid $110 EACH for my RX7's Used but Cleaned Etc. :Oops:

Two years ago it seemed reasonable but not now! :P

i have a set of 550cc NipponDenso (blue) injectors that used to be on my RB20 with AP Eng Power FC. Was running a HKS GT2530, >200rwkw. Highest I ever saw the duty cycle reach was about sixty something % at WOT on circuit. Plenty of room for a bigger turbo. If running PFC and using low impedence injectors, u'll need a GT-R resistor pack. Don't think going the RX7 injector route is good - i tried before, had issues.

p.s. I'm selling both the injectors (only done 1500kms) and resistor pack on FS forums if anyone's interested :P

Hi TT, we run the Series V RX7 Injectors, I had to buy 8 to get 6 good ones, good ones are had to find now. If you needed the extra capacity (560 cc's versus 420 cc's on our flow bench ) then it would be a better route that the GTR injectors. You don't need resistors to match them to the RB20 Power FC. The GTR injectors are good for around 265 rwkw, so they will suite your purposes perfectly. Get them cleaned and flowed as usual, there are variations as with all injectors. I always put the highest flowing one in #6, next in #5.

Hope that helps :D

Why not buy a Malpassi adjustable regulator, and up the fuel pressure. You are probably running a bit under 3bar fuel pressure, I believe you can fairly safely run up to around 4bar.

Why not buy a Malpassi adjustable regulator, and up the fuel pressure. You are probably running a bit under 3bar fuel pressure, I believe you can fairly safely run up to around 4bar.

The fuel pump is rated at 73.5 psi, if you run 4 bar (59 psi) fuel pressure that only leaves 14.5 psi for boost. I think TT needs more than 1 bar of boost. :D

Hi TT, we run the Series V RX7 Injectors, I had to buy 8 to get 6 good ones, good ones are had to find now.  If you needed the extra capacity (560 cc's versus 420 cc's on our flow bench ) then it would be a better route than the GTR injectors.  You don't need resistors to match them to the RB20 Power FC.  The GTR injectors are good for around 265 rwkw, so they will suite your purposes perfectly.  Get them cleaned and flowed as usual, there are variations as with all injectors.  I always put the highest flowing one in #6, next in #5.

Hope that helps :D

Had always thought RX7 were the go... had read many forums in the past, but when you are doing other programs it is all information that wont fit on my nearly full hard drive (I had to forget my parents names so I could remember to change gears in a manual again).

Will start the search now...

TT

PS: Had some joy with dump skyd, even though deal not yet closed.

Sorry for jumping in but SK did you say that with the power fc on a rb20 you dont need the resistor pack for the gtr injectors????, I may have read wrong tho.

Nathan

Hi Nathan either you read it wrong, or I wrote it wrong. You definitely need high impedance with the RB20DET Power FC, so if you use low impedance injectors (as in GTR) you need to increase the impedance. You can do that by using the GTR resister pack or by using individual resisters at the injectors.

Hope that clarifies :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...