Jump to content
SAU Community

Recommended Posts

hi guys,

for a while now i've wanted eyelids for my r33, but didnt want to fork out the cash.

I work as a laser operator and i can cut what ever i need which is great, today i was bored so i decided to see if i could cut some eyelids for my car. i worked on it here and there all day, and finally came up with something, i dont think they look too bad, but i want opinions and advice from you guys.

it's been cut out of 0.6mm steel so its flexible to bend around the headlight.

i've only made 1 so far to see how it would look, got home, sprayed in a gloss black to roughly match the car to get to see what it would look like.

i'll make more of an effort once i have the final product and shape perfected.

anyway, let me know what you's think

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

not bad at all good work

thanx, but does it need to be changed in any way??

any suggestions??

cos im not sure, something doesnt look right...

i cant find any decent pics of r33's with eyelids, if anyone has any pls post them.

need more feedback

Guest RedLineGTR

Still looking for some decent photos. This one I dug up but since the car is white the eyelids almost blend into the guards (makes them hard to see).

Don't know if you can see what I’m getting at but they continue around/along the side where the parker part of the headlight is.

Still looking for some decent photos. This one I dug up but since the car is white the eyelids almost blend into the guards (makes them hard to see).

Don't know if you can see what I’m getting at but they continue around/along the side where the parker part of the headlight is.

i get what you mean.

havent seen them like that before, but it would take me 2 mins to alter it like that, might make a few different sets, see what people think/like...

the bigger the size you can post the better so i can zoom in close.

Let me drive: i wont be able to paint them for you, as i dont have access to paints that will match your car, but as soon as i have perfected it i might put them in the for sales section, in bare metal. then you can apint them yourself

thanx alot for all your feedback, but more is appreciated and pics too.

one more thing: if anybody actually has proper eyelids and can be bothered, could you pls trace the outline of the eyelids so i can get an exact eyelid shape to go off.

that shouldnt be a problem.

looks easier, only problem is i need the car here at work or at least the headlight to work off, or a stencil/trace of the original eyelid.

im currently working on the yelid that redlinegtr mentioned, the one that curves all the way round the headlight. im almost finished.

as soon as i get home i'll spray it, put it on my car and take a photo to show you guys.

hope i can finish it, to man6y bosses walking around today, hehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...