Jump to content
SAU Community

Recommended Posts

whats ur budget.....

power fc is bang for ur buck $1150 from nengun u can barely match it

(dont forget to add cost of larger afm ~$500 for a gtr)

other comps like the others u mentioned run a MAP sensor hence bypass the AFM

my opinion

1.microtech....good value comp if u cant get a pfc to match ur application

waste of time on a gtr bc it wont control the multiple throttle bodies

2.autronic is good but is expensive once u add all the hidden items they dont mention when u buy one its heavy on the wallet

hope this helps

:P

Link to comment
https://www.sau.com.au/forums/topic/51747-apexi-power-fc/#findComment-1022634
Share on other sites

yeah that sounds alrite. I don't want to do my car cheaply. I want to do it so I can pump out massive power and not have to worry about changing from an apexi fc with seems "cheap" as such. I want something that will work from a mild tune to a wild one.

Link to comment
https://www.sau.com.au/forums/topic/51747-apexi-power-fc/#findComment-1022690
Share on other sites

If you are going to go PFC for a "wild" car, I'd go with DJETRO. They do away with AFMs. One question is this 'wild' car going to be street driven? If so, I reckon a PFC is the best choice. Good value, zero installation cost, and plenty of people can tune them. If you want some logging functions too, buy datalogit. If you are buying a PFC (any type) then for sure Nengun is the place to go :(

Richard

Link to comment
https://www.sau.com.au/forums/topic/51747-apexi-power-fc/#findComment-1023061
Share on other sites

Apexi Power FC, Will they cope big power GTR's or is it best to go for a different angle like a Microtech or Autotronic??

All you have to do is look at kira wilsons (not sure on spelling) R32 GTR hes running a Power FC. And thier are many 9sec cars in Japan running Power FC's

Its more a case of budget performance. Where you don't have the advantages of Traction Controll - Wheel spin monitoring, 1/4 mile read outs, hp read out. As what other ECUs like Autronic can offer. But at a much higher price level.

Link to comment
https://www.sau.com.au/forums/topic/51747-apexi-power-fc/#findComment-1023067
Share on other sites

Mmmmmm BIG POWER, well the Apexi drag R33 GTR (V Max) makes 1,100 ps using a Power FC with AFM's. I have yet to see a limit to how much power a Power FC can handle. Their injector control is pretty awesome, 1300 cc injectors are no problem. They have enough map references, both ignition and fuel. Add a Datalogit and you can log your runs and control a few extra things like intercooler sprays etc.

The only step up I would consider from a Power FC is a Motec M600 and you are looking at 4 to 5 times the Power FC costs by the time all the functions are enabled and full initialisation, set up, wiring and tuning is completed.

Hope that is of some help.

BTW; V Max runs 8's at 165 mph.

Link to comment
https://www.sau.com.au/forums/topic/51747-apexi-power-fc/#findComment-1023655
Share on other sites

All you have to do is look at kira wilsons (not sure on spelling) R32 GTR hes running a Power FC.  And thier are many 9sec cars in Japan running Power FC's

Keir Wilson's running a PowerFC piggybacked with a Motec. I think one of the reasons for doing this is as he retains the standard style ATESSA which requires input from the ECU - something Motec + Autronic can't do(?). You'll need to run either a standard ECU or PowerFC to retain the standard ATESSA system, or change over to a manual ATESSA setup like the Veilside or Jun ones.. although I can't see the value in one of these over a home-made job.

If you want to run a complete datalogging system as well as an electronic dash the PowerFC + Pi System 2 or AIM dash (or another brand) would work a treat, the PowerFC + dash would cost less than a Motec dash by itself.

Link to comment
https://www.sau.com.au/forums/topic/51747-apexi-power-fc/#findComment-1024327
Share on other sites

Check out the latest Zoom mag for ND4SPD it runs a wolf plug and play and has noe made 682rwhp im street trim on BP ultimate fuel.Now going single throttle body so it will make a lot more by late next month.Wolf can run TPS v MAP or MAP or MAF for air sensing and does boost control etc standard were PFC this is a major cost extra.

Link to comment
https://www.sau.com.au/forums/topic/51747-apexi-power-fc/#findComment-1024425
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...