Jump to content
SAU Community

Recommended Posts

Hi everyone ;)

After talking to a few ppl, I decided to come back and join the forum. Alot of people here will know the old car (and what happened to it :D ):

post-2-10840896716.jpg

I considered an R33 GTS-T as a replacement but really not the kind of car I drive. Its not that I don't like skylines (if i didn't why would I be here lol), its just not my style. In the end I found a car I really like. This is the new car:

post-2-10913548340.jpg

I picked it up pretty much stock excpet for superlow springs and the chrome wheels. I got rid of the superlows and stock shocks right away. Following in the same style as the Mirage, the car now rides on koni coilovers. It's also had a rear strut brace, adjustable rear sway bar, front castor kit, and rear camber kit installed. The tyres were replaced with Yoko ES100, and kevlar brake pads all round.

Anyway I hope the sight of a Honda in this thread dosen't offend too many people. I have always appreciated SAU as one of the few remaining forums for true motoring enthusiats.

Link to comment
https://www.sau.com.au/forums/topic/52200-new-member/
Share on other sites

its definitely got *bling*. Those del Sol's can go ok with a few mods.. fairly rare too.

Yeah the bling bling wasn't my choice :Oops: But these cars are rather hard to find so you have to take them as they come. The heavy chrome wheels will be comming off when I have the funds for something else, but the suspension work had to come first. Stock performance is ok, since it's got the B16A motor in it. They usually run in the 15's. Anyway experience with the mirage has shown that there is more to going fast than the 1/4 mile.... Ohh and I love how you can drive around for a whole week without seeing another car the same ;)

Link to comment
https://www.sau.com.au/forums/topic/52200-new-member/#findComment-1029479
Share on other sites

Plus the Mirage held up quite good considering what speed you were doing when it abruptly came to a sudden stop! You were quite lucky to walk out of it I reckon! Damn Urban 4x4's, they should be banned! You know in California there are over 33 MILLION SUV's!!

And yeah I couldnt lose it on some of the mountains we went driving on! :)

Welcome to the world of oversteer!

Link to comment
https://www.sau.com.au/forums/topic/52200-new-member/#findComment-1030008
Share on other sites

WB mate, yep the ole' mirage went pretty well through the twisties. I agree whole heartedly, suspension first.....It what I always do, so it must the right thing to do, haha. I am sure the new wheels will handle pretty damn well to, although some nice spoon manifolds and stuff would be nice too :) hehe

Link to comment
https://www.sau.com.au/forums/topic/52200-new-member/#findComment-1030851
Share on other sites

Hahaha those JDM bling bling honda parts are not cheap! Mitsubishi and Nissan parts are cheap in comparison... For example, a quad throttle setup for the mirage was going to be just over $2k. Same thing for the Honda is $5500! And the price the honda people will pay for a set of headders :uhh:

Anyway I'm pretty happy with the handling now. Just fine tuning the settings a bit. It actually feels quicker than the mirage, which I never thought it would (the sol is a heavier car, plus the targa roof should make it less rigid).

Charly: Yeah thats the gremlin lancer in the left of the photo

Link to comment
https://www.sau.com.au/forums/topic/52200-new-member/#findComment-1030910
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...