Jump to content
SAU Community

Recommended Posts

i have posted this thread in some other forums ... i know it have been posted alot ..but i hope u can get use of it here .

this is what i'v done to my r34 gtt ,,

any one have GTT could do the same ..

other cars could get use of the main idea

what u need is :

1-two water sprayer ...i'v taken it from my r32 bonnet

2-water pipes ...

3-one way to two way water connector ...

4-(small water pump ..but this will need another water tank and diffrent switch).. no need if u gonna do it my way ..

pic for water sprayer ,connectors and water pump i'v taken them from my r32

Link to comment
https://www.sau.com.au/forums/topic/52508-water-spray-for-intercooler/
Share on other sites

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

ok ... after u have all u'r stuff ...

now time to open alot of scrows .. :uh-huh:

1st let me tell u how its gonna work ..

i have rear wiper that i dont really use .. so i said i'll get use of the water pump of that wiper to spray the cooler ... and no need for extra wiring and drilling and stuff

so .. what i'v done .. is unplug the rear wiper .. (c pic2 and pic3 )so when i use the stock rear water spray switch it wont activet the wiper ..

ok after doing that ..

u start with unscrowing stuff ..

1st unscrow the scrows under the front bumper (pic4 )

and from inside the bumper in the left and the right sides there is one scrow .. (pic5a)

and one white cliper (pic5)

then ... two black clipers .. beside each head light undo them .. (pic6 and pic7)

there will be some kinda supporter between the head lights ... i already toke it off so its not in the pic .. :uhh:

now u'r bumper is free ... but befor u pull it out ... make sure u unplug the signal indecator plug ... !!

after that u will have full access to u'r front side .. (pic8 & pic8a )

(pic8b) .. is the stock water pumps .. right one is for the rear wiper .. left one is for the front wiper .

i will use the right one . in my project

now we start the real job ...

u will see the black cover around the cooler ... there is 2 scrows holding it .. undo them ,,, the outside one is easy .. the insie one is really hard to reach .. (try hard any way ) (pic9)

after u take it out ... drill a hole in the top of it and the buttom .. (pic10)

dont make it a big hole .. ( i didnt fit it with any glow or somthing .. just the hole and the pipe ) its up to u anyway ..

after that . u will have the sprayer fited (pic11)

refit the black cover in its place

now fit the pipes to the pump and find some good place to line them see what i'v done .. (pic12)

rescrow every thing back ... hope u still remember where to fit every thing back .. ...

and most important ... signal indecator plug .... dont forget to plug them befor fitting the bumper ..

befor that .. make sure the sprayer is working .. and u didnt use the front wiper water pump .. ..

last pic to post ....

SPRAYER IN ACTION ..

Note .. try to adjust the path of the water in the sprayer .. !!

AND U CAN USE ANY OTHER KIND OF SPRAYER .. .. THOSE ONES ARE NOT REALLY COOL ... BUT I USED THEM CUZ THEY DO NOT DRAIN WATER WHEN THE PUMP IS OFF ...

by the way sorry .. the car was sooooooo dirty ... ;)

hope that could help guys ..

nice writeup, noticed any difference?

thanx mate ...

yeah .. u can feel some increas in power ... some times i put very cooled water in the tank just to test .... damn u feel alot of power.. am thinking ..u can put some ice in the tank.. lol that would be cool :)

. i will change the sprayers .... those one spray like shit ... they spray in direct line ..so its only a small area which will be sprayed .... u can see that in the last pic ...

but u can feel more power thou

im in the process of doin the same thing to my 34 but doin it a little different....im using the rear motor the same as u have done but what im doin is disconnecting the motor from the factory loom completely....ive got an Apexi RSM meter with has a postive output which can be selected at a certain RPM that u want...what im doin is using the output from the RSM meter through a relay to run the motor on the sprayer...so what happens is that if u select the RSM meter at 5000rpm then once the car hits 5000rpm the spray will come on automatically....the rpm can be set to anything so if ur car starts hitting boost at around 3000rpm u set it at 3000rpm and the sprayers come on at boost....

This is just a automatic way of doin it so u dont have to worry bout flicking switchs to activate it...the good thing is that the function can also be turned off on the RSM to stop it all together.... Hope it all made sense to everyone...good luck if trying this method

  • 2 weeks later...
im in the process of doin the same thing to my 34 but doin it a little different....im using the rear motor the same as u have done but what im doin is disconnecting the motor from the factory loom completely....ive got an Apexi RSM meter with has a postive output which can be selected at a certain RPM that u want...what im doin is using the output from the RSM meter through a relay to run the motor on the sprayer...so what happens is that if u select the RSM meter at 5000rpm then once the car hits 5000rpm the spray will come on automatically....the rpm can be set to anything so if ur car starts hitting boost at around 3000rpm u set it at 3000rpm and the sprayers come on at boost....  

This is just a automatic way of doin it so u dont have to worry bout flicking switchs to activate it...the good thing is that the function can also be turned off on the RSM to stop it all together.... Hope it all made sense to everyone...good luck if trying this method

maaaaaan .. thats cool ... if u can post some pic .here .. that would be great ..

the relay any the wiring ... hope u can help mate

Nice write up OMRAN.  You might wanna use sprayers that disperse a mist instead of a stream of water.  I believe it is more effective.

I wanna do it to my car. :D

Scott

yeah ... i just tryed to change them .. but the other ones are leaking water .. !! i'll try to find good ones... .. thanxx bro

ive got it all up and runnin, i will post some pics on how to as soon as i can (in the next couple of days) the only problem i got is that when u fill the bottle to the top, theres to much pressure and its pushin water out the nozzles until the pressure drops, im lookin for a valve to put inline to stop this, will let u know how i go

nozila ... i thought of putting some ice ... i will soon .. :D .. its a good idea .. lol

cnblow ... yeah the same problem i faced when i tryed to change the sprayers ..

by the way it will keep leaking as long as the level of the water in tank is higher then the level were u mount the sprayer ..

cant wait to see u'r post ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...