Jump to content
SAU Community

Recommended Posts

any body have or know about Buddy club suspension for the stageas ? please let me know if its worth the $2034.50 they quote dilivered to your door.

http://www.nengun.com/buddy-club/club-racing-spec-damper

how low will it go? how hard would the ride be will it fit the s1? what is included in this kit? and most of all how good is the handling.

cheers

any body have or know about Buddy club suspension for the stageas ? please let me know if its worth the $2034.50 they quote dilivered to your door.

http://www.nengun.com/buddy-club/club-racing-spec-damper

how low will it go? how hard would the ride be will it fit the s1? what is included in this kit? and most of all how good is the handling.

cheers

I currently have 4 guys with Buddy Club suspension in their Skylines that I am supplying softer spring rates to in an attempt to get them some ride comfort.

:nyaanyaa: cheers :happy:

ok scrap that idea then can you put a quote together for me for every thing ill need to get better suspension for my S1 stag - the springs

figure i can just use my old ones (probly not the best but will cut cost a bit)

ok scrap that idea then can you put a quote together for me for every thing ill need to get better suspension for my S1 stag - the springs

figure i can just use my old ones (probly not the best but will cut cost a bit)

The Group Buy thread is the best place to start

http://www.skylinesaustralia.com/forums/in...showtopic=85592

Then PM me if you have any questions.

:O cheers :woot:

that thread is for people with half a clue about suspension.... sif i know what i need ? so for my question, what do i need with out the springs? and how much for every thing you're about to tell me i need

that thread is for people with half a clue about suspension.... sif i know what i need ? so for my question, what do i need with out the springs? and how much for every thing you're about to tell me i need

PM sent

:O cheers :woot:

I might be picking up a gtr rear cradle, susp, brakes, all of the above, really cheap too... I'll let you know how it goes...

what do i need to know in order to convert it...I have a bunch of mechanic mates up here with all the tools and probably all the knowledge i need, but i would love to discuss it with someone first. Take full advantage of the SAU collective wisdom.

I assume i will need:

mod certs afterwards

GTR rear end without HICAS for donor parts (which models are these - i assume it's the 34 only)

will the GTR rear driveshaft fit? or should i use the Stagea one?

I will PM Cruiseliner and SK

Edited by captinsane
  • 5 weeks later...
  • 4 weeks later...

a crossreference list ive made up for all the suspension components on the stagea

info sourced from FAST, cusco, JIC websites

Front Sway bar

R33 GTR

Rear Sway bar

S14

Front camber arms

GTR33

wgnc34

Rear camber arms

S14

r33

rear toe arms

s14

r33

rear traction /tension arms

s13

s14

s14

y32

y33

v35

all 32 /33/34s

a31

z33

c33/34/35

front tension rods

BNR32

BNR33

toe rods front

a31 cefiro

HC33

M35

i think that covers all of them....

  • 4 weeks later...
a crossreference list ive made up for all the suspension components on the stagea

info sourced from FAST, cusco, JIC websites

Front Sway bar

R33 GTR

Rear Sway bar

S14

Front camber arms

GTR33

wgnc34

Rear camber arms

S14

r33

rear toe arms

s14

r33

rear traction /tension arms

s13

s14

s14

y32

y33

v35

all 32 /33/34s

a31

z33

c33/34/35

front tension rods

BNR32

BNR33

toe rods front

a31 cefiro

HC33

M35

i think that covers all of them....

front struts for s2 r33 r34 pedders xtreme full adjustable ride hight if you have tein's such as i did you need hq - wb rear spring dampers up top to complete this conversion with standard tops not a prob !

front struts for s2 r33 r34 pedders xtreme full adjustable ride hight if you have tein's such as i did you need hq - wb rear spring dampers up top to complete this conversion with standard tops not a prob !

i know that it sounds like i dont know what i am talking about but did have tein tops but did with the 3rd stagea run in perth i fractured one badly r33 strut tops all good all installed back on track looking forward to next meeting !

  • 1 month later...

Has anyone here just replaced thier stock factory shocks with another set of standard ones. Although I would love to buy SK's whiteline/bilstien setup in the group buy I have just spent so much money on the car this year so far that I just can't justify anymore at the moment. Most of the bushes have already been replaced with whiteline ones anyway (by the previous owner) and with the new nismo kit bringing the car down lower anyway I don't have any intention on lowering it at the moment anyway. So I just want to replace the clapped out stock shocks with another set of stock ones. Basically just after prices and opinions from anyone thats done it. Recomended brands etc.....

Has anyone here just replaced thier stock factory shocks with another set of standard ones. Although I would love to buy SK's whiteline/bilstien setup in the group buy I have just spent so much money on the car this year so far that I just can't justify anymore at the moment. Most of the bushes have already been replaced with whiteline ones anyway (by the previous owner) and with the new nismo kit bringing the car down lower anyway I don't have any intention on lowering it at the moment anyway. So I just want to replace the clapped out stock shocks with another set of stock ones. Basically just after prices and opinions from anyone thats done it. Recomended brands etc.....

New standard Skyline shocks cost more than Bilsteins last time I checked. The standard shocks won't have the valving to control lowered springs (check out this thread http://www.skylinesaustralia.com/forums/in...=103158&hl) plus they will wear out pretty fast. Which is probably why your current (standard) shocks are stuffed.

;) cheers :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...