Jump to content
SAU Community

Recommended Posts

what spring rate is the sydneykid stuff? and is it much different to the whiteline? tein's are 4/4, and take 10weeks... sydneykid is proving impossible to order thru, so looks like i have to go thru whiteline, got two blown shox :thumbsup:

just confirmed for my spring rates yesterday. They are 8kg/mm for the front and 7kg/mm for the rears. This is for the Tein HA made specifically for 260rs and the vavlving changed over to oz specs.

what spring rate is the sydneykid stuff? and is it much different to the whiteline? tein's are 4/4, and take 10weeks... sydneykid is proving impossible to order thru, so looks like i have to go thru whiteline, got two blown shox :P

Sydneykid's kits use Whiteline bars and Bilstein shocks, and all the info (part numbers, etc.) is in the beginning of this thread or the other (group buy) thread, so if worst comes to worst and he can't be reached then you should be able to source most parts quite easily.

are his revalved? if not, i will be ordering 33gtr fronts, gtst rears tomorrow, worry about the rest later.

Goldzilla, you dont happen to have a contact number for him by any chance?

-Ryan

look you have to wait for good stuff. If its a bad stuff you dont have to wait like a moroes suspension you can get it anywhere.

Just wait for Sk get his setting and you are set for a few years.

are his revalved? if not, i will be ordering 33gtr fronts, gtst rears tomorrow, worry about the rest later.

Goldzilla, you dont happen to have a contact number for him by any chance?

-Ryan

No, I don't have his number unfortunately Ryan. But I have met him and spoken to him extensively, and he knows his sh!t, so like Yudi says, it'll be worth the wait if you order through him...

getting bilsteins new for now, as driving on blown shockers isnt exactly sensible, then going to do the rest of his package and get a guy i know to valve the shocks to match.

-Ryan

Are just going to cange the shocks only? or with the springs? I suggest you do both at the same time. Sk has moded the valving as per his own calculation. If the guy you know is good enough to do the calculation then go ahead. If i were you probably i would just go and buy a heap ass shock to whack it in first and wait for Sk if you are that desperate. I assume the stag is your only car?

Wjat im trying to say is dont waste your money just wait for Sk man. I think its well worth it.

just checked SK's profile guys

FYI

In Topic: R33 Gtr Bilstein & Whiteline Suspension

Sorry for the delay in responding, especially to PM's. The video card in my home PC died and it took me 4 days to find out what it was and fix it. So I am about 110 PM's behind at the moment and trying hard to catch up. Add that to the workload at Superior Suspension (12 to 14 hours a day, 6 days a week) and it will take me a few days to answer everyone.

Hang in there, if you have transferred money, it's safe, I am not going to run off to Brazil with it. You won't miiss out, the Group Buy isn't going to end soon as I have spent some time with Bilstein securing the shock supply for a couple of months at least.

Advanced warning, I am off to the US for 5 weeks from 1st October to 5th November. Checking out some east coast action, Detroit, Chicago, Daytona and the SEMA show in Vegas. So when I don't respond to PM's or emails in that period, I am sure you will understand why.

cheers

just an FYI on his behalf so we know what's going on

does any body know that castor rod bushings can be replace easily or not? say cuscos castor rod with whiteline bushing. or once the bushing is shagged you have to throw away the whole thing?

http://page14.auctions.yahoo.co.jp/jp/auction/s67417831

In the link above items, are they the so call caster kits?

Hey Yudi, re-use original castor rods, Whiteline castor bushes part # KCA332/$150 a pair approximately = to suit 260RS series 1, (dunno about series 2) from any Whiteline dealer. Noltec equivalent (dunno part #, phone Wilkinson Suspension, Perth WA for part #) They quoted $75 a pair approximately. Original bushes tight, used a mandrel about 0.5mm less than dia of outer metal ring on original bushings, start to move/press out at around 5 tonne, press in easier with "must use" white grease supplied. Just have to keep 'em correctly aligned until they "pop in" is all.

I used guide rod through centre offset adjusting bush to sorta keep things in line plus oversize mandrel for install, until poly bush was more or less in place. Also decided pretty much where I wanted centre (offset drilled) locating bolt/castor bias to be before pressing everything together. Take care not to damage fine threads on rearward fixing studs during ticklish re-assembly. Have fun. No problems yet but next job in that department will most likely be reco/renew power steering pump. Sure does load up steering felt through steering wheel.

Cheers >_<

Hey Yudi, re-use original castor rods, Whiteline castor bushes part # KCA332/$150 a pair approximately = to suit 260RS series 1, (dunno about series 2) from any Whiteline dealer. Noltec equivalent (dunno part #, phone Wilkinson Suspension, Perth WA for part #) They quoted $75 a pair approximately. Original bushes tight, used a mandrel about 0.5mm less than dia of outer metal ring on original bushings, start to move/press out at around 5 tonne, press in easier with "must use" white grease supplied. Just have to keep 'em correctly aligned until they "pop in" is all.

I used guide rod through centre offset adjusting bush to sorta keep things in line plus oversize mandrel for install, until poly bush was more or less in place. Also decided pretty much where I wanted centre (offset drilled) locating bolt/castor bias to be before pressing everything together. Take care not to damage fine threads on rearward fixing studs during ticklish re-assembly. Have fun. No problems yet but next job in that department will most likely be reco/renew power steering pump. Sure does load up steering felt through steering wheel.

Cheers :P

Hi Wicksy,

we are talking about the front castor rods right? You mean Wilkinson Suspension, Perth WA have the adjustable bushes for the 260rs for $75/pair? Does it make a lot of difference? in terms of handling after having more castor? let me know

Yudy

more positive castor makes a difference although stageas will only let you wind on a smaller amount than skylines. worthwhile investment.

i have the noltec adjustable rods rather than whiteline bushes.

Edited by wolverine
more positive castor makes a difference although stageas will only let you wind on a smaller amount than skylines. worthwhile investment.

i have the noltec adjustable rods rather than whiteline bushes.

why would you rather have Nolec compared to the whitelines? cos of quality , pricing? Whats the part number to Noltecs?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...