Jump to content
SAU Community

Recommended Posts

SK, have you any info on my items as they haven't arrived as yet.  I did send you a PM but you may not have got it.  It has be over two weeks now, just want to know if there is any drama as it is probably just the frieght takng its time as usual to Darwin.

Cheers ICE.

Hi Ice, has it arrived OK? If not, you can check its progress on the Toll website, just use the con note number I PM'd you.

:) cheers :)

  • 2 weeks later...

G'day Happymeal, I have just bought a 98' stagea that has a leaking front shock and sounds like they are bottom out. It rides bumps in the road like a pogo stick. It has been lowered about 30mm in the front and 20mm in the back, on black HKS coils.The shocks are pedders so I found out what is in it and I was told r32 gtr. They are 16mm shorter on extension, 6mm shorter compressed and the stroke is 20mm shorter, than r33 gtr. That conflicts with what I have read on these suspension pages, saying we should use r33 gtr. Did you sort out what model shock you needed?

G'day Happymeal, I have just bought a 98' stagea that has a leaking front shock and sounds like they are bottom out. It rides bumps in the road like a pogo stick. It has been lowered about 30mm in the front and 20mm in the back, on black HKS coils.The shocks are pedders so I found out what is in it and I was told r32 gtr. They are 16mm shorter on extension, 6mm shorter compressed and the stroke is 20mm shorter, than r33 gtr. That conflicts with what I have read on these suspension pages, saying we should use r33 gtr. Did you sort out what model shock you needed?

So far 6 Stageas fitted with Group Buy kits, so can confirm the following;

R33GTR front will fit, valving may be OK depending on shock quality

R33GTST rear will fit, valving is not OK.

:huh: cheers :)

  • 3 weeks later...

For anyone that slides around in the wet, the suspension kit is a MUST.

Before the car has pretty crappy weight transfer and i was opposite locking a lot. From lock to lock to lock to lock. Now the baby just slides soooo smooth. I can hold bigger, longer, more angle slides with much much less stress.

Good work!

Hey Guy's after receiving my stagea i found out it had aftermarket suspension. can anyone tell me about GAB Sports coilovers? I know the fronts have 4 dampening adjustments in the top, dunno about the back.

Don't know much about GAB's for Skylines. I have replaced a few in Hondas though. Very harsh, big spring rates, twin tube shock design so small piston area etc. In summary, a fairly basic, low cost, Jap coil over. See how they feel for you, they will accept lower spring rates, that does improve the ride and handling a little.

:P cheers :)

  • 1 month later...

ok, just need to know if l'm right here.

I can use:

fronts - R33 GTR shocks

rears - R33 GTST shocks

on the stagea right?? I have a set of springs l want to put in, but don't want to do it using stock shocks.

Or is there another option rather than the bilstein's ... something around the 100-125 a shock area?? atm l can't justify spending anymore than about $500 on it all, my finance's just won't stretch the far unfortunately. :D

Edited by [ STAGEN ]
  • 4 weeks later...

A lowering question, pretty much aimed at SydneyKid, but happy to hear from anyone(!).

Your method of lowering via latheing more circlip grooves down the strut body, can this be done when using the standard Stagea shocks? Or is that option only available if you upgrade to Bilstein or similiar? Would naturally like new shocks, but still paying car off, so low cost mods only for me at the moment.

Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...