Jump to content
SAU Community

Recommended Posts

Been asking around, and it seems that NONe of the major insurance co. are insuring imports anymore (what a crock).

Can anyone tell me who are good brokers in Perth, and what i would expect to pay (93 gts-t), considering the insurance would be in my dads name, with me as a nominated driver.

any help would be greatly appreciated,

thanx. :confused:

Link to comment
https://www.sau.com.au/forums/topic/5350-who-does-insure-in-perth/
Share on other sites

Yeh, they're not too bad... but i'm only saying that becuase noone else will insure me with an import.

Just remember if you get your car stolen... it's...

$1000 basic excess

$1000 Age Excess

$1000 theft excess.....

so $3k if it gets stolen, and $2k if you have a bingle!! (bleh!)

Originally posted by SeriesIIGTST

HBF don't insure imports

I was with them for 4 years and when i got my 'line they gave me the big f*$koffski. I'm with RAC now paying $1.3K on the same 96 series II Stritch9ine got a quote for :-) for 21yo.

Daym! Your with RAC ? How did that happen ? Nice work!

yeah i know the s15 / 200sx is not an import ... i was just getting to the point that they do cover young driver's :P

anyways ... i heard that insurance only cover's an accident involving an import if the cover is under their name ? eg. if the car's insurance is under my brother, and i crash it then insurance wont cover it`

anyone know if this is true ?

Originally posted by 34GTt

yeah i know the s15 / 200sx is not an import ... i was just getting to the point that they do cover young driver's :)  

anyways ... i heard that insurance only cover's an accident involving an import if the cover is under their name ? eg. if the car is under my brother, and i crash it then insurance wont cover it`

anyone know if this is true ?

all the different insurance companies are different on threir policy but it is fair to say if the car is under your farther, mother, brother ,sister even your pets. then you crash the car; I presume they wont like to be process your claim... would you if you are insurance company think about it!:P :uh-huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...